Help with upper control arm... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ScottG · 04-11-2012, 07:17 PM

I s it possible to remove the upper control arm from the studs without taking it all the way apart? What I mean is, can you remove the 2 nuts, slide the upper arm off rotate the shaft (which is on backwards), and slide it back on with the spindle and lower arm in place?

**lolife99** · 04-11-2012, 07:55 PM

Yes.

ScottG · 04-11-2012, 09:11 PM

Thanks!

04-11-2012, 07:17 PM	#1
ScottG Registered User Join Date: Feb 2012 Location: Ventura,Ca Posts: 745	Help with upper control arm... I s it possible to remove the upper control arm from the studs without taking it all the way apart? What I mean is, can you remove the 2 nuts, slide the upper arm off rotate the shaft (which is on backwards), and slide it back on with the spindle and lower arm in place? __________________ '67 C20 LBW

04-11-2012, 07:55 PM	#2
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,701	Re: Help with upper control arm... Yes. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

04-11-2012, 09:11 PM	#3
ScottG Registered User Join Date: Feb 2012 Location: Ventura,Ca Posts: 745	Re: Help with upper control arm... Thanks! __________________ '67 C20 LBW



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.