|
04-13-2012, 12:08 PM
|
#1 |
|
Registered User
Join Date: Jun 2009
Location: Claymont DE
Posts: 225
|
Lowering and C-notch
Has any one lowered their 71-72 rear with a 4" coil and not used a c-notch. I know all the books and manufactures recommend a notch when lowering 4 or more but I was wondering if it is just a ploy to get you to buy more. Right now I am measuring 6" between the bottom of my bump stop and top of my axle so if I lower 4" I should have 2" of play. Would that be enough for travel without having the bump stops slam the axle? Also this may be a stupid question but is there a way to tell if your coils are stock or not? I would be really mad if I ordered a 3" coil and installed it only to see the truck drop 1"
|
|
|
|
04-13-2012, 12:22 PM
|
#2 |
|
Registered User
Join Date: Aug 2008
Location: Parker Dam California
Posts: 71
|
Re: Lowering and C-notch
Purchase the 4 and c notch ,2 inches the rear end will still hit the frame .
Posted via Mobile Device |
|
|
|
|
04-13-2012, 12:25 PM
|
#3 |
|
C-10 Club Member
Join Date: Mar 2010
Location: Corona,CA
Posts: 1,001
|
Re: Lowering and C-notch
No need for a notch at 4".
__________________
1969 Short Fleet 350/SM465 4.5/6.5 ECE drop 20" Raceline Wheels 1998 2dr Tahoe 5/7 drop 20"/22" Coys-sold Build thread...http://67-72chevytrucks.com/vboard/s...d.php?t=401910 |
|
|
|
|
04-13-2012, 12:28 PM
|
#4 |
|
Senior Member
Join Date: Jan 2005
Location: Ontario, Kali
Posts: 2,427
|
Re: Lowering and C-notch
What Cole said...
And you can cut your bump stops in half for a little more room... Dano
__________________
 '69 FleetIt ain't yours, if you didn't build it! |
|
|
|
|
04-13-2012, 12:40 PM
|
#5 |
|
///Relaxed Atmosphere
Join Date: May 2010
Location: Houston,Tx
Posts: 1,266
|
Re: Lowering and C-notch
i got 6 inch coils and a 1/2 inch block with no c-notch so a very well doubt you will need to c-notch with a 4 inch coil
__________________
71-Cheyenne Super (E.C.E Static Drop 4.5/7". Intro Rally's 20X8.5 5" B.S 255/35/20 (F) 20X10 5.25 B.S 275/35/20 (R) 87-Silverado Static Drop 5/7" Raceline Explosion 5 22X8.5 (F) 22X10 (R) hector _________________________________ 1971 Chevrolet Cheyenne Super 1987 Chevrolet Silverado 2006 Ford Mustang GT 2012 Toyota 4-Runner 2014 Dodge Ram 1500 Sport Crew Cab |
|
|
|
|
04-13-2012, 12:45 PM
|
#6 |
|
Registered User
Join Date: Jun 2008
Location: South Florida
Posts: 11,375
|
Re: Lowering and C-notch
no need for a cnotch for anything under 6 inches of drop. I had six inch drop springs with no notch and it barely if ever bottomed out.
__________________
Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild |
|
|
|
|
04-13-2012, 01:15 PM
|
#7 |
|
wanna be 67
Join Date: May 2007
Location: Nor Cal
Posts: 696
|
Re: Lowering and C-notch
^ what they said. I have 6" without a notch.
Posted via Mobile Device |
|
|
|
|
04-13-2012, 01:20 PM
|
#8 |
|
Shortbed club member
Join Date: Jan 2008
Location: Halethorpe, MD
Posts: 439
|
Re: Lowering and C-notch
Ditto
6" drop here with no notch, just cut your bump stops back.
__________________
71 custom/10 6.0/4L80E SWB ece 4/6 72 custom camper 350/3 spd 2020 Chevy Express 3500 2023 Hyundai Tuscon 1986 GMC 3500 Bucket Truck Sent from my Rotary Phone via 14.4kb/s modem. |
|
|
|
|
04-13-2012, 01:37 PM
|
#9 | |
|
VA72C10
 
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,267
|
Re: Lowering and C-notch
Quote:
Measure on a flat surface from the ground to the wheel arch front and rear. That will give you a starting point. You can compare it to some finished rides on here. Post here to get some other input/comparisons... Most of the time stock springs have sagged at least an inch...
__________________
Looking for a 67-72 swb or blazer project in or around VA.
|
|
|
|
|
|
04-13-2012, 02:05 PM
|
#10 |
|
Registered User
Join Date: Jun 2009
Location: Claymont DE
Posts: 225
|
Re: Lowering and C-notch
rear well to ground 34" and front well to ground 32"
|
|
|
|
|
04-13-2012, 02:15 PM
|
#11 |
|
68 C 10
 
Join Date: Aug 2010
Location: Advance ,Mo
Posts: 554
|
Re: Lowering and C-notch
Im going with a notch in mine only because im going with 6 to 7 inch drop . If i was only going 4 i would leave it alone.
__________________
Kevin "Life is Hard But its Harder when your Stupid" John Wayne 68 C10 70 C20 http://67-72chevytrucks.com/vboard/s....php?t=602326# |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
