NJ Fresh 350 sbc engine cheap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ScottH** · 03-28-2012, 10:13 AM

I have a fresh 350 engine that I am not going to use for sale.
The short block has been completely rebuilt, zero miles on it.
Heads are from a 305 with 1.94 valves and some light porting done.
Engine just needs ur choice of cam, gaskets, and accessories.
Comes with a set of mis-matched shortie headers and mini starter.
First person with $500 gets it.

Any questions pls LMK.

Thanks
Scott

**Bethewaz** · 03-28-2012, 10:48 AM

Do you have a casting number and date code?
Thanks

**ScottH** · 03-28-2012, 11:10 AM

Casting # is 3970010.....how do u find the date code?

HotRod C/10 · 03-28-2012, 11:19 AM

right front of block should be a # stamped in, just infront of the passenger side head
Thats a good block with high nickel content.

**Bethewaz** · 03-28-2012, 02:57 PM

Quote:

Originally Posted by ScottH

Casting # is 3970010.....how do u find the date code?

Casting Date code is on the rear of the block on top (passenger side), kind of opposite the casting number. It should be smaller in size and will be a letter with a few numbers after it. for example: F122 (June 12 of 1972) This is the date the engine block was made.

DSALMAN described the location of the stamped VIN and/or date code w/ engine suffix code (which tells you what it actually came in, date when that was determined, horsepower, transmission, 2 or 4 bolt main, etc. and is usually close to the assembly date of the vehicle).

In my case, I am interested specifically in the casting date code. Thanks!!

**ScottH** · 03-28-2012, 10:33 PM

Got busy today and didnt get a chance to get it, but will tomorrow.

BTW I also have a 350 bare block I pulled from a 72 Cheyenne.

Scott

**ScottH** · 03-29-2012, 10:10 AM

I looked at the block and there is no date code in that location.
Checked another block and found it just as u said, not sure why there isnt one on this motor.

**ScottH** · 03-29-2012, 05:14 PM

ttt

**ScottH** · 03-29-2012, 11:07 PM

must sell

frednoah · 03-30-2012, 08:44 PM

Wife would kill me if I brought home a motor, but I could use a mini starter. Any chance you'd want to separate?

**ScottH** · 03-30-2012, 10:12 PM

Sorry its a package deal

**ScottH** · 03-31-2012, 02:37 PM

ttt

**ScottH** · 04-02-2012, 11:17 PM

ttt

**ScottH** · 04-04-2012, 09:39 AM

ttt

**MidLifer** · 04-04-2012, 08:21 PM

Scott - I am local and interested. PM me a number where I can call you.
Posted via Mobile Device

**ScottH** · 04-04-2012, 10:16 PM

Jim, PM sent

**ScottH** · 04-06-2012, 10:30 PM

ttt

**ScottH** · 04-08-2012, 10:06 AM

will include a used 350 turbo trans......what a deal!

**ScottH** · 04-15-2012, 11:05 PM

ttt

03-28-2012, 10:13 AM	#1
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Fresh 350 sbc engine cheap I have a fresh 350 engine that I am not going to use for sale. The short block has been completely rebuilt, zero miles on it. Heads are from a 305 with 1.94 valves and some light porting done. Engine just needs ur choice of cam, gaskets, and accessories. Comes with a set of mis-matched shortie headers and mini starter. First person with $500 gets it. Any questions pls LMK. Thanks Scott Attached Images __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-28-2012, 10:48 AM	#2
Bethewaz Registered User Join Date: Feb 2012 Location: Caledonia, NY Posts: 183	Re: Fresh 350 sbc engine cheap Do you have a casting number and date code? Thanks

03-28-2012, 11:10 AM	#3
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Fresh 350 sbc engine cheap Casting # is 3970010.....how do u find the date code? __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-28-2012, 11:19 AM	#4
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: Fresh 350 sbc engine cheap right front of block should be a # stamped in, just infront of the passenger side head Thats a good block with high nickel content. __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

03-28-2012, 10:33 PM	#6
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Fresh 350 sbc engine cheap Got busy today and didnt get a chance to get it, but will tomorrow. BTW I also have a 350 bare block I pulled from a 72 Cheyenne. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-29-2012, 10:10 AM	#7
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Fresh 350 sbc engine cheap I looked at the block and there is no date code in that location. Checked another block and found it just as u said, not sure why there isnt one on this motor. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-29-2012, 05:14 PM	#8
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Fresh 350 sbc engine cheap ttt __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-29-2012, 11:07 PM	#9
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Fresh 350 sbc engine cheap must sell __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-30-2012, 08:44 PM	#10
frednoah 86 Scottsdale Join Date: May 2010 Location: Mooresville NC Posts: 473	Re: Fresh 350 sbc engine cheap Wife would kill me if I brought home a motor, but I could use a mini starter. Any chance you'd want to separate?

03-30-2012, 10:12 PM	#11
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Fresh 350 sbc engine cheap Sorry its a package deal __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-31-2012, 02:37 PM	#12
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Fresh 350 sbc engine cheap ttt __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

04-02-2012, 11:17 PM	#13
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Fresh 350 sbc engine cheap ttt __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

04-04-2012, 09:39 AM	#14
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Fresh 350 sbc engine cheap ttt __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

04-04-2012, 08:21 PM	#15
MidLifer Senior Member Join Date: Apr 2011 Location: South NJ Posts: 1,264	Re: Fresh 350 sbc engine cheap Scott - I am local and interested. PM me a number where I can call you. Posted via Mobile Device

04-04-2012, 10:16 PM	#16
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Fresh 350 sbc engine cheap Jim, PM sent __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon



Register or Log In To remove these advertisements.

04-06-2012, 10:30 PM	#17
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Fresh 350 sbc engine cheap ttt __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

04-08-2012, 10:06 AM	#18
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Fresh 350 sbc engine cheap will include a used 350 turbo trans......what a deal! __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

04-15-2012, 11:05 PM	#19
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Fresh 350 sbc engine cheap ttt __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

Register or Log In To remove these advertisements.