|
04-13-2012, 11:23 PM
|
#1 |
|
Registered User
Join Date: Oct 2011
Location: Michigan City, Indiana
Posts: 158
|
Valve Covers
For A Few weeks Now I Noticed I Had A Oil Leak From My 86 2500 with the 350, i thought maybe my rear main seal was bad or something, well today i got around to oil change and tune up when i pulled the plugs all the threads had oil on them i knew then that it was not my rear main seal but it was my valve covers leak i have the Edelbrock Signature Series Chrome Valve Covers on it, i went to a local high performance auto part store and he recommended me the blue rubber gaskets, they looked pretty thick and really good, i heard about the chrome valve covers leaking so i sanded the bottom of them down and painted them with some high temp black to keep them from rusting after letting the paint dry i then reinstalled the covers with the new gasket and went for a ride around the block i crawled under the truck to pull the oil drain plug and i noticed the back side of the valve cover had oil leaking. What should i do to fix the problem?it kinda ticked me off because i spend half a day figuring it out and fixing it and found out it still leaks. My Question is it worth screwing with again or should throw the cheap Edelbrock covers away and order the Edelbrock ALUMINUM Baffled Valve Covers from Summit Racing? i want to stick with Edelbrock. Thanks
|
|
|
|
04-14-2012, 12:39 AM
|
#2 |
|
Registered User
Join Date: Jul 2009
Location: washington
Posts: 4,178
|
Re: Valve Covers
I had some HOLLEY valve covers that were cast aluminum they never leaked. So I imagine the edelbrock cast ones will work. But the sheet metal edelbrocks are good for wall art and nothing else
Posted via Mobile Device
__________________
377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511 |
|
|
|
|
04-14-2012, 08:38 AM
|
#3 |
|
Registered User
 Join Date: Sep 2010
Location: New Hope, PA
Posts: 279
|
Re: Valve Covers
i had a set of the edelbrock elite valve covers and they were twisted so bad that by the time i sanded and got the bottoms flat they wouldnt clear my rockers.
__________________
1985 c10 355 th350 (working on 4 speed conversion to super t10) 1979 camaro 358 super t10 2003 f250 superchip slp exhaust |
|
|
|
|
04-14-2012, 08:44 AM
|
#4 |
|
Robert Olson Transport
 
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,277
|
Re: Valve Covers
use silicone both sides and it should stop leaking unless they are really twisted
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
|
|
|
|
04-14-2012, 09:17 AM
|
#5 |
|
78K & 79C Jimmys
Join Date: Nov 2009
Location: Ottawa Ont CANADA
Posts: 7,901
|
Re: Valve Covers
I had a set from a car,seemed to always leak...
put them on the 78 Jimmy.....same thing, had the block sprayed ,tested with black light turns out it's coming threw the casting,they put some stuff on it sealed up great still on it
__________________
John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350 |
|
|
|
|
04-17-2012, 03:08 PM
|
#6 |
|
Registered User
Join Date: May 2008
Location: Salt Lake City
Posts: 365
|
Re: Valve Covers
go with aluminum... they won't leak... Steel always does
|
|
|
|
|
04-17-2012, 05:35 PM
|
#7 |
|
78K & 79C Jimmys
Join Date: Nov 2009
Location: Ottawa Ont CANADA
Posts: 7,901
|
Re: Valve Covers
depends why but aluminum can too
__________________
John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350 |
|
|
|
|
04-17-2012, 07:04 PM
|
#8 |
|
Registered User
Join Date: Mar 2012
Location: harrisville, ms
Posts: 377
|
Re: Valve Covers
spend a few more coin and buy yourself a set of the aluminum fabricated valve covers and your rubber gaskets need to be syliconed into the bottom of any valve covers thats the oly way i have ever gotten those to seal up.
http://www.ebay.com/itm/SBC-CHEVY-Ta...item256ed9bc7f i have these on old style heads never have had an issue with them
__________________
most people sleep peacfully at night because, rough men stand ready to do violenceon there behalf. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
