Air bag air line question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Pro Performance · 04-20-2012, 07:06 PM

Your best option for tubing is the plastic style, but make sure to get DOT approved. It is a little heavier and made with air suspension in mind.

You run the schrader valves up front, but I would recommend a small portable in the truck that goes to 120 PSI, just in case you need to add air and aren't by a gas station. Also, maybe a union and some spare line in case of emergencies of a broken or damaged line.

Air Line
Fittings for 1/4" Line

Small portable that goes to 120 PSI, which would be enough to lift the bag if needed, would be around $70.

Hope this info helped and answered your questions.

04-20-2012, 07:06 PM	#2
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: Air bag air line question Your best option for tubing is the plastic style, but make sure to get DOT approved. It is a little heavier and made with air suspension in mind. You run the schrader valves up front, but I would recommend a small portable in the truck that goes to 120 PSI, just in case you need to add air and aren't by a gas station. Also, maybe a union and some spare line in case of emergencies of a broken or damaged line. Air Line Fittings for 1/4" Line Small portable that goes to 120 PSI, which would be enough to lift the bag if needed, would be around $70. Hope this info helped and answered your questions.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.