1929-32 Chevrolet 6 Cyl Head needed! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Clyde65** · 05-10-2011, 11:22 AM

I need the above head to be either rebuilt or rebuild-able, please let me know what you have or if you know of someone that may have one, please forward their info to me. Thanks guys!

mbgmike · 05-13-2011, 06:38 PM

good luck. I will ask around but not many companies are willing to rebuild them when they are that old. May have to send it off somewhere to have it done if you find one. Might post on Hemmings or Classic Car Club of America.
might get a better response since this area is new to the forum but I will look

here is one from hemmings
http://www.hemmings.com/classifieds/...d/1217672.html

http://www.hemmings.com/classifieds/...d/1216508.html

**Clyde65** · 05-14-2011, 10:56 AM

Thanks Mike, that is all I ask, for someone to ask people they know.
I have two heads, both are cracked pretty bad and the machine shop doesnt think they will be able to salvage anything. I found another one up north, had a friend go and buy the whole motor, pull it and take the motor and head to a trusted machine shop, guess what? it was also cracked and cant be fixed. blew through $1K real fast for nothing, well I did get a good block. but I already had one.

LeftCoast32 · 10-16-2011, 09:42 AM

If I end up keeping my 1932 Chevrolet Pick-Up then it will be getting the L79 327 I have. It has a running and driving Engine and Transmission in it that will have to come out. I will keep you posted.

**Clyde65** · 10-18-2011, 05:26 PM

LeftCoast,

My machine shop was able to repair another head I found. the motor is all back together and is on the hook to go back into my dad's 1930 2door sedan. Thanks for thinking of us.

BTW, be careful on how much HP you put into that truck, these had wood in them and too much HP will rattle them apart, only small nails holding them together. I know you were trying to sell it. I would hold onto that and attempt to sell it all together, you would get more offers that way, but that is me and it is your truck. thanks again! I know in Oklahoma there is a big prewar swapmeet and that is where I would try to sell it.

68SHORTBOX · 04-30-2012, 05:19 PM

Clyde65, Try the guys at Inliners International, they have tons of info and links to parts. Also try the guys on the stovebolt page.

www.stovebolt.com

68shortbox

05-10-2011, 11:22 AM	#1
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	1930-31 Chevrolet 6 Cyl Head needed! I need the above head to be either rebuilt or rebuild-able, please let me know what you have or if you know of someone that may have one, please forward their info to me. Thanks guys! __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!* Last edited by Clyde65; 05-10-2011 at 02:36 PM.

05-13-2011, 06:38 PM	#2
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: 1929-32 Chevrolet 6 Cyl Head needed! good luck. I will ask around but not many companies are willing to rebuild them when they are that old. May have to send it off somewhere to have it done if you find one. Might post on Hemmings or Classic Car Club of America. might get a better response since this area is new to the forum but I will look here is one from hemmings http://www.hemmings.com/classifieds/...d/1217672.html http://www.hemmings.com/classifieds/...d/1216508.html Last edited by mbgmike; 05-13-2011 at 06:51 PM.

05-14-2011, 10:56 AM	#3
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: 1929-32 Chevrolet 6 Cyl Head needed! Thanks Mike, that is all I ask, for someone to ask people they know. I have two heads, both are cracked pretty bad and the machine shop doesnt think they will be able to salvage anything. I found another one up north, had a friend go and buy the whole motor, pull it and take the motor and head to a trusted machine shop, guess what? it was also cracked and cant be fixed. blew through $1K real fast for nothing, well I did get a good block. but I already had one. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!* Last edited by Clyde65; 05-14-2011 at 10:56 AM.

10-16-2011, 09:42 AM	#4
LeftCoast32 Custom Builder Join Date: Jun 2003 Location: Carlsbad, California Posts: 908	Re: 1929-32 Chevrolet 6 Cyl Head needed! If I end up keeping my 1932 Chevrolet Pick-Up then it will be getting the L79 327 I have. It has a running and driving Engine and Transmission in it that will have to come out. I will keep you posted. __________________ 1932 Chevy Roadster Car and Pick-Up - http://67-72chevytrucks.com/vboard/s...d.php?t=465709 1966 K20 Factory 4X4 - http://67-72chevytrucks.com/vboard/s...d.php?t=455484 (Sold) 1972 K5 Blazer (Sold) - http://67-72chevytrucks.com/vboard/s...ad.php?t=87530 2007 TrailBlazer SS - http://67-72chevytrucks.com/vboard/s...34#post4706534

10-18-2011, 05:26 PM	#5
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: 1929-32 Chevrolet 6 Cyl Head needed! LeftCoast, My machine shop was able to repair another head I found. the motor is all back together and is on the hook to go back into my dad's 1930 2door sedan. Thanks for thinking of us. BTW, be careful on how much HP you put into that truck, these had wood in them and too much HP will rattle them apart, only small nails holding them together. I know you were trying to sell it. I would hold onto that and attempt to sell it all together, you would get more offers that way, but that is me and it is your truck. thanks again! I know in Oklahoma there is a big prewar swapmeet and that is where I would try to sell it. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

04-30-2012, 05:19 PM	#6
68SHORTBOX Registered User Join Date: Jul 2006 Location: El Cajon Ca Posts: 84	Re: 1929-32 Chevrolet 6 Cyl Head needed! Clyde65, Try the guys at Inliners International, they have tons of info and links to parts. Also try the guys on the stovebolt page. www.stovebolt.com 68shortbox



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.