CA '69 a/c cab - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ScottG · 04-30-2012, 12:51 PM

A/C cab rom '69 GMC low tunnel.. Pretty decent shape. Some rust on the left rocker, as usual. Some surface rust on the top windshield area. There is a dent on the right side where the blower motor goes. Can easily be pulled out, and will be covered by the fender. corners are nice, floors ok, some rust in the usual areas, but not bad. dash is UNCUT, roof is nice, small window w/ slider included. Really a nice cab over all. I was gonna keep it, but I need the room. $150.00 takes it, no ship on this one.

**70cst** · 04-30-2012, 03:35 PM

Bump

Tuff Gong · 04-30-2012, 03:38 PM

off topic here, but how do you post so many pics at one time? I seem to have a 5 pic limit per post.

**master 1969 c10** · 04-30-2012, 04:00 PM

whats the big deal it might have been his first time saleing something

ScottG · 04-30-2012, 04:17 PM

Quote:

Originally Posted by Brian Atkinson

off topic here, but how do you post so many pics at one time? I seem to have a 5 pic limit per post.

I have all my pics on Picasa. So I can link to the pics from there, and post them here.

R.J · 04-30-2012, 09:23 PM

i want to buy the cab can you send your phone number Thanks

ScottG · 04-30-2012, 09:36 PM

Quote:

Originally Posted by R.J

i want to buy the cab can you send your phone number Thanks

You need to clear out some pm's so I can send you my #

ScottG · 05-01-2012, 11:35 PM

Still available...

HeavyMetalChevy · 05-02-2012, 01:11 AM

How long could this sit? Also could you put it on a pallet? I can handle all other shipping arrangements.

ScottG · 05-02-2012, 01:19 AM

Quote:

Originally Posted by HeavyMetalChevy

How long could this sit? Also could you put it on a pallet? I can handle all other shipping arrangements.

I could hold it for a bit. I can also get it on a pallet. We have strapping stuff at work. How long are you thinking?

HeavyMetalChevy · 05-02-2012, 01:30 AM

a week or so. I have a lot of local interest in cabs at the moment. Just going to follow up on requests and leads and I will know for sure say tomorrow.

jessewebb · 05-02-2012, 07:48 AM

would you send me some pics of the outside firewall. I'm putting a AC system in my truck, and I'd like to see a couple pics of the firewall to see if and where I need to cut any extra holes. my email is jpwebb62@yahoo.com I'd really appreciate it. it would help me out, I'm getting ready to start on that next. Thanks Pete

ScottG · 05-02-2012, 11:25 AM

Quote:

Originally Posted by jessewebb

would you send me some pics of the outside firewall. I'm putting a AC system in my truck, and I'd like to see a couple pics of the firewall to see if and where I need to cut any extra holes. my email is jpwebb62@yahoo.com I'd really appreciate it. it would help me out, I'm getting ready to start on that next. Thanks Pete

there is a clear picture of the firewall up above. Are you looking for something different?

ScottG · 05-02-2012, 04:12 PM

Quote:

Originally Posted by HeavyMetalChevy

a week or so. I have a lot of local interest in cabs at the moment. Just going to follow up on requests and leads and I will know for sure say tomorrow.

I do have one person ahead of you. Let's see how that plays out.

04-30-2012, 12:51 PM	#1
ScottG Registered User Join Date: Feb 2012 Location: Ventura,Ca Posts: 745	'69 a/c cab A/C cab rom '69 GMC low tunnel.. Pretty decent shape. Some rust on the left rocker, as usual. Some surface rust on the top windshield area. There is a dent on the right side where the blower motor goes. Can easily be pulled out, and will be covered by the fender. corners are nice, floors ok, some rust in the usual areas, but not bad. dash is UNCUT, roof is nice, small window w/ slider included. Really a nice cab over all. I was gonna keep it, but I need the room. $150.00 takes it, no ship on this one. __________________ '67 C20 LBW

04-30-2012, 03:35 PM	#2
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: '69 a/c cab Bump __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

04-30-2012, 03:38 PM	#3
Tuff Gong Registered User Join Date: Jan 2011 Location: Glendale, AZ Posts: 3,178	Re: '69 a/c cab off topic here, but how do you post so many pics at one time? I seem to have a 5 pic limit per post.

04-30-2012, 04:00 PM	#4
master 1969 c10 Active Member Join Date: Oct 2009 Location: Columbus Ohio Posts: 157	Re: '69 a/c cab whats the big deal it might have been his first time saleing something

04-30-2012, 09:23 PM	#6
R.J Registered User Join Date: Feb 2010 Location: Reedley,Ca. Posts: 41	Re: '69 a/c cab i want to buy the cab can you send your phone number Thanks

05-01-2012, 11:35 PM	#8
ScottG Registered User Join Date: Feb 2012 Location: Ventura,Ca Posts: 745	Re: '69 a/c cab Still available... __________________ '67 C20 LBW

05-02-2012, 01:11 AM	#9
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: '69 a/c cab How long could this sit? Also could you put it on a pallet? I can handle all other shipping arrangements. __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

05-02-2012, 01:30 AM	#11
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: '69 a/c cab a week or so. I have a lot of local interest in cabs at the moment. Just going to follow up on requests and leads and I will know for sure say tomorrow. __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

05-02-2012, 07:48 AM	#12
jessewebb Registered User Join Date: May 2010 Location: beckley, WV. Posts: 823	Re: '69 a/c cab would you send me some pics of the outside firewall. I'm putting a AC system in my truck, and I'd like to see a couple pics of the firewall to see if and where I need to cut any extra holes. my email is jpwebb62@yahoo.com I'd really appreciate it. it would help me out, I'm getting ready to start on that next. Thanks Pete __________________ *Pete* The worst I ever had was wonderful *69 SWB* work in progress *97 Ranger* 6in. lift on 35's *04 325i* lady's ride



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.