pulleys not lining up...help

[Husker]

I used a shim kit I got from Summit or such. I think it was Moroso brand.
Ron

[Sport/Truck]

Originally Posted by rsavage

I too would not use washers. Measure the depth of your water pump to make sure it is a short pump. The pulleys on the water pump are not different sizes as yours seem to be. Get part numbers off your PS pulley and the pulleys on the balancer. Call this guy - Jim at either 480-981-3096 or 602-751-0454. He sells on ebay as "gotpulley", is extremely knowledgeable and will know exactly what you will need to do it right.

Originally Posted by Husker

I used a shim kit I got from Summit or such. I think it was Moroso brand.
Ron

I've used both to fix this common problem. I used the shim to fix the crank pulley alignment, and Jim help me get the proper power steering pulley.
s/t