OR 100's of misc parts from the last 6 trucks parted out

[Last_Paladin]

Any window regulator tracks?

[tll74]

Originally Posted by Last_Paladin

Any window regulator tracks?

Sure, no problem I have lots of them. 20.00 each. Acid dipped and media blasted 30.00 each. Thanks, Tom

[Last_Paladin]

Originally Posted by tll74

Sure, no problem I have lots of them. 20.00 each. Acid dipped and media blasted 30.00 each. Thanks, Tom

These are the ones the regulator slides in, on the lower part of the door? Held into the door with 2 screws?

[RexDodge]

Just found your thread! Do you still have a dome light lense? 71 C10 is what it is for. I'll be in Eugene early next week. I'd like to stop by and look if that's possible. PM me info? Thanks.

[C. M. Wolf]

Hello Til74,(Tom), I need a right side,(passenger), bench seat slide-rail mounting bracket for a 70 Chevy, C-20.

The one I have now is missing the locking catch sys & cable to the left side. Have you anything like this left to sell? "Please" PM me with some contact info and I'll be right on it,(I actually need a few things).

Michael

[tll74]

Originally Posted by Last_Paladin

These are the ones the regulator slides in, on the lower part of the door? Held into the door with 2 screws?

Sounds like you need the horizontal channel that mounts with two screws at the bottom and one at the top above the latch. I was talking about the channel mounted to the base of the glass.

Originally Posted by RexDodge

Just found your thread! Do you still have a dome light lense? 71 C10 is what it is for. I'll be in Eugene early next week. I'd like to stop by and look if that's possible. PM me info? Thanks.

PM sent

Originally Posted by C. M. Wolf

Hello Til74,(Tom), I need a right side,(passenger), bench seat slide-rail mounting bracket for a 70 Chevy, C-20.

The one I have now is missing the locking catch sys & cable to the left side. Have you anything like this left to sell? "Please" PM me with some contact info and I'll be right on it,(I actually need a few things).

Michael

Michael, I have the complete seat tracks for 40.00 plus shipping. PM sent

[Last_Paladin]

Originally Posted by tll74

Sounds like you need the horizontal channel that mounts with two screws at the bottom and one at the top above the latch. I was talking about the channel mounted to the base of the glass.

Correct.

[Pmarti69]

I will take the following:

2 (BEST) GMC turn/park lamp wire looms 6.00 each
2 (BEST) GMC turn lens-housing good color 15.00 each
2 (BEST) window cranks 7.50 each

Also, is the item circled in the picture a kickdown wire for TH400, if so price, please. And do you have the bolts for the hood and hinges; looking for all 10 bolts. Thanks Paul

[sboris]

Been looking for a set of turquoise seat belts. I'm gonna throw a serious offer of
$200 for the wife to let go of those.... Let me know. Thanks
Posted via Mobile Device

[tll74]

Originally Posted by Pmarti69

I will take the following:

2 (BEST) GMC turn/park lamp wire looms 6.00 each
2 (BEST) GMC turn lens-housing good color 15.00 each
2 (BEST) window cranks 7.50 each

Also, is the item circled in the picture a kickdown wire for TH400, if so price, please. And do you have the bolts for the hood and hinges; looking for all 10 bolts. Thanks Paul

Paul, I sold the best two pictured lens to C5phil in post 267. But the good news is I have 4 more of these trucks yet to part out that have them. I'm sure I can do a nice pair. Not really sure what that harness was for. I do have other TH400 harnesses. What year are you looking for? Just took one out of a 70 C20 with a 402 and a 72 C10. 5.00 for the correct hood hinge bolts. Thanks, Tom

Originally Posted by sboris

Been looking for a set of turquoise seat belts. I'm gonna throw a serious offer of
$200 for the wife to let go of those.... Let me know. Thanks
Posted via Mobile Device

Umm...let me think on it for bit. If I was to sell them would you have any interest in the matching dash pad (nice), visors, and door panels. All out out of a 68 CST. I have been holding this stuff aside for her 68 project. If I sold any part of this package I would have to change the color for her truck which would be fine as she would go with black or the original grey.

Thanks, Tom

[sboris]

Umm...let me think on it for bit. If I was to sell them would you have any interest in the matching dash pad (nice), visors, and door panels. All out out of a 68 CST. I have been holding this stuff aside for her 68 project. If I sold any part of this package I would have to change the color for her truck which would be fine as she would go with black or the original grey.

Thanks, Tom[/QUOTE]

I'm interested with pics. Don't need the door panels that bad, but hey why not. Let's talk..
Posted via Mobile Device

[Pmarti69]

[QUOTE=tll74;5356273]Paul, I sold the best two pictured lens to C5phil in post 267. But the good news is I have 4 more of these trucks yet to part out that have them. I'm sure I can do a nice pair. Not really sure what that harness was for. I do have other TH400 harnesses. What year are you looking for? Just took one out of a 70 C20 with a 402 and a 72 C10. 5.00 for the correct hood hinge bolts. Thanks, Tom


Hey Tom,

Let me know on the the GMC lens and if in good shape will take at the same price. I am looking for the TH400 kickdown switch under dash with the wiring harness to tranny, pending price. I will take the 10 bolts for the hood and hood hinges for total of 10 bolts. I would like to pay for everything at once, if ok with you. Thanks Paul

[unclesalty]

Howdy; May have missed these;
Looking for a fender emblem, 69 GMC 2500 V-Eight
Rear e-brake cable, both sides, 69 3/4 ton lwb dana 60-one end attaches thru rear
brake dust cover, the other end clips to the intermediate cable.
One 69 GMC 3/4 ton 2wd hubcap,16" wheel (dogdish)
Wire harness from firewall ares to rear of bed, tail/brake lites, plate lites etc Thanks

[Pmarti69]

[quote=Pmarti69;5356976]

Originally Posted by tll74

Paul, I sold the best two pictured lens to C5phil in post 267. But the good news is I have 4 more of these trucks yet to part out that have them. I'm sure I can do a nice pair. Not really sure what that harness was for. I do have other TH400 harnesses. What year are you looking for? Just took one out of a 70 C20 with a 402 and a 72 C10. 5.00 for the correct hood hinge bolts. Thanks, Tom


Hey Tom,

Let me know on the the GMC lens and if in good shape will take at the same price. I am looking for the TH400 kickdown switch under dash with the wiring harness to tranny, pending price. I will take the 10 bolts for the hood and hood hinges for total of 10 bolts. I would like to pay for everything at once, if ok with you. Thanks Paul

Tom,
Disregard on the TH400 kickdown and wiring, found it. I still interested in the rest of the items. Paul

[400smallblock]

im looking for the passenger side grill molding in pic 3 for gmc. its the heavy chrome molding that wraps around the outside of the grill.thanks, i hope u still have it.

[tll74]

Originally Posted by unclesalty

Howdy; May have missed these;
Looking for a fender emblem, 69 GMC 2500 V-Eight
Rear e-brake cable, both sides, 69 3/4 ton lwb dana 60-one end attaches thru rear
brake dust cover, the other end clips to the intermediate cable.
One 69 GMC 3/4 ton 2wd hubcap,16" wheel (dogdish)
Wire harness from firewall ares to rear of bed, tail/brake lites, plate lites etc Thanks

I have the GMC 1500 V-Eight emblem, don't have any E-brake cables pulled at this time, no nice GMC caps at this time, only have the tail light harness from the firewall to the rear bumper-nothing up to the lenses.

Originally Posted by 400smallblock

im looking for the passenger side grill molding in pic 3 for gmc. its the heavy chrome molding that wraps around the outside of the grill.thanks, i hope u still have it.

"RH GMC eyebrow minor ding nice driver 15.00" Yes, I still have it.

Originally Posted by sboris

Umm...let me think on it for bit. If I was to sell them would you have any interest in the matching dash pad (nice), visors, and door panels. All out out of a 68 CST. I have been holding this stuff aside for her 68 project. If I sold any part of this package I would have to change the color for her truck which would be fine as she would go with black or the original grey.

Thanks, Tom

I'm interested with pics. Don't need the door panels that bad, but hey why not. Let's talk..
Posted via Mobile Device[/QUOTE]
Didn't get a chance for pics today. Should be able to post some tuesday night.
[quote=Pmarti69;5356976]

Originally Posted by tll74

Paul, I sold the best two pictured lens to C5phil in post 267. But the good news is I have 4 more of these trucks yet to part out that have them. I'm sure I can do a nice pair. Not really sure what that harness was for. I do have other TH400 harnesses. What year are you looking for? Just took one out of a 70 C20 with a 402 and a 72 C10. 5.00 for the correct hood hinge bolts. Thanks, Tom


Hey Tom,

Let me know on the the GMC lens and if in good shape will take at the same price. I am looking for the TH400 kickdown switch under dash with the wiring harness to tranny, pending price. I will take the 10 bolts for the hood and hood hinges for total of 10 bolts. I would like to pay for everything at once, if ok with you. Thanks Paul

Paul, I have two very nice lenses for the same price.

[400smallblock]

tll74, i assume the"rh" eyebrow is the passenger side? if so ill take it. 15.00 +shipping to 17324 please. personal check?

[Pmarti69]

Tom,

Ill take the 2 lens, 2 wiring looms for the lens and the windows handles. Ill pm you for info. Thanks Paul

[unclesalty]

Hey there ..... forgot to ask, also trying to find the upper side molding, both sides, for an 8' bed.. need only the 2 bed pieces, have the doors and fenders, dont have to be perfect...thanks- if you rustle up a set of rear e-brake cables, lmk,thanks

[unclesalty]

How much for the wire harness? (firewall area to rear bumper), zip is 48609.

[tll74]

Originally Posted by sboris

Been looking for a set of turquoise seat belts. I'm gonna throw a serious offer of
$200 for the wife to let go of those.... Let me know. Thanks
Posted via Mobile Device

Pics of the dash pad. It is very nice, 150.00. I see no cracks and would clean up nicely. In my opinion it would be a hard find to find one any nicer. The door panels are nice 75.00 but not sure if they are original? I'll sell the belts. Let me know on the pad and panels. Thanks, Tom

[tll74]

Originally Posted by unclesalty

Hey there ..... forgot to ask, also trying to find the upper side molding, both sides, for an 8' bed.. need only the 2 bed pieces, have the doors and fenders, dont have to be perfect...thanks- if you rustle up a set of rear e-brake cables, lmk,thanks

15.00 for the taillamp harness. I have the upper box moldings that are nice driver qauility for 45.00 pair. Are you wanting shipping cost on all of the parts you asked about? Thanks, Tom

[deezilboy]

Will take the interior door handles if chrome is nice with no pitting. 2 window crank, 2 door handles. A wiring harness which has fan switch connector plug for a/c. Thanks.

[400smallblock]

tom, ill take take the "rh eyebrow". my shipping info is in a private message to you. please let me know howa and where to send payment. thanks

[unclesalty]

Yes, please figure a total for the harness and both pieces of trim to 48609, thanks
Posted via Mobile Device