|
03-27-2012, 07:19 PM
|
#1 |
|
Registered User
Join Date: Jul 2011
Location: Vernon BC Canada
Posts: 287
|
1969 gmc 910
Hello this is my 1969 GMC 910.
Drums all around 6bolt 250 inline6 camd with HEI and header no drop and a mean lean trany is a world class T5 PO did everything that has been done to date was told my carb is off a toyota i will be swaping it over to 5 bolt with the disk brake upgrade 2.5" drop spindles and air bags all around. i have another frame in the yard and want to Z it..step notch it..and cup the lower A arms...then start to build up a new truck ..but for now i want to drive my 910 low.. i also have a 1971 3/4 ton GMC 4x4 that i will be driving for winter |
|
|
|
03-27-2012, 07:19 PM
|
#2 |
|
Registered User
Join Date: Jul 2011
Location: Vernon BC Canada
Posts: 287
|
Re: 1969 gmc 910
lol i need these pipes out of my way bad..
|
|
|
|
|
03-27-2012, 08:25 PM
|
#3 |
|
Registered User
Join Date: Jul 2011
Location: Vernon BC Canada
Posts: 287
|
Re: 1969 gmc 910
here is a pic of what the rear coils look like in my 910 right now im guessing they have been heated? lol they look bad...and a few pics of the spare frame im going to Z and step notch. and my 4X4 i built for a friend he put 14.000 into it and then crashed it and got payed out ...so i got it from ICBC for 1800 and hade the frame pulled back to spec and got the new front clip to go on it will be driving it this winter
|
|
|
|
|
03-27-2012, 08:43 PM
|
#4 |
|
Registered User
Join Date: Dec 2006
Location: Rolla, MO
Posts: 2,463
|
Re: 1969 gmc 910
I've gotta ask because I've never heard of one. What is a 910?
__________________
-Scott- |
|
|
|
|
03-27-2012, 09:37 PM
|
#5 |
|
Registered User
Join Date: Jul 2011
Location: Farmville, Va
Posts: 3,026
|
Re: 1969 gmc 910
right now a 910 looks like a good starter piece
|
|
|
|
|
03-27-2012, 10:10 PM
|
#6 |
|
Registered User
Join Date: Jul 2011
Location: Vernon BC Canada
Posts: 287
|
Re: 1969 gmc 910
i guess a 910 is a canadain.C10
|
|
|
|
|
03-27-2012, 10:16 PM
|
#7 |
|
Registered User
Join Date: Dec 2007
Location: Nanaimo B.C.
Posts: 604
|
Re: 1969 gmc 910
this is the badge looks like 910 = half ton 920 = 3/4 ton
__________________
I was hooked on these trucks since 1982 when I drove my budys fathers 1968 Custum GMC 396 automatic dana 60 rear with a power lock diff what a ride more fun then we will we can ever tell!! |
|
|
|
|
05-06-2012, 03:17 PM
|
#8 |
|
Registered User
Join Date: Jul 2011
Location: Vernon BC Canada
Posts: 287
|
Re: 1969 gmc 910
ok so i have the air bags in front and back and the 2.5 drop spindles/disk brake swap this is a new pic of the truck aired out...the back end will be in next week i hope
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
