fender front corners 67-68 desperately need wtb

[joedoh]

need some 67 or 68 fender corners, the forward 3-4 inches or so, primarily the leading edge and the area around the headlight rings. I know someone has to have some blasted/rusted/wasted fenders that are straight on the front edge and can cut them loose and mail em to me for a price.

[Todd68Chevy]

I may have showed you this before but does this have what you are looking for in good enough shape? I can get more pictures if you want. Thanks

[joedoh]

yep thats what I need and no I have never seen it before. just the fender edges, cup rust is unimportant.

[Todd68Chevy]

Originally Posted by joedoh

yep thats what I need and no I have never seen it before. just the fender edges, cup rust is unimportant.

I thought this might make a good wall ornament but I know I will never get the project done so if the parts can help out. The 3rd picture is trying to show a dent. How much are you wanting/ needing? Unbolt the fenders and that is it or do you want them cut down for shipping purposes. $20.00 per side plus shipping also it might be Friday before I can get it apart. Let me know

[joedoh]

Works for me. I won't need the cups and you can cut the length back to the inner support. Might fit in a priority mail flat rate box by then.
Posted via Mobile Device

[Todd68Chevy]

Originally Posted by joedoh

Works for me. I won't need the cups and you can cut the length back to the inner support. Might fit in a priority mail flat rate box by then.
Posted via Mobile Device

I must not know where you are wanting them cut if they are going to fit is that small of a box. Here are some pictures of the parts I unbolted. Then I will post a couple pictures of where I thought you wanted them cut. Let me know.

[Todd68Chevy]

Last picture of them and then some that would be the part I thought you wanted. Let me know.

[Todd68Chevy]

I am still needing to know where you want these cut off at. Let me know. Thanks

[joedoh]

SORRY,

I was logging in and checking PMs waiting for you to reply, when I should have been checking the thread!

the last pictures showing the cut areas will work just fine. If they dont fit in the priority box, thats fine, it was just an idea. If you are getting a box and shipping ups or however, dont cut them at all, my sheetmetal guy will appreciate the extra material to fudge around with. maybe a woofer box from a stereo shop? I have a UPS account if needed.

[Todd68Chevy]

Originally Posted by joedoh

SORRY,

I was logging in and checking PMs waiting for you to reply, when I should have been checking the thread!

the last pictures showing the cut areas will work just fine. If they dont fit in the priority box, thats fine, it was just an idea. If you are getting a box and shipping ups or however, dont cut them at all, my sheetmetal guy will appreciate the extra material to fudge around with. maybe a woofer box from a stereo shop? I have a UPS account if needed.

No problem on my end. If I do not cut them the box I have that they fit in is 34"X28'X11" and weighs 28 pounds. I will be shipping from zip code 47882. I do not see that I have your zip code to figure shipping. Let me know if you want them cut for smaller box and less weight. Thanks

[joedoh]

pm sent