Looking for some 67 parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

c-tenkid · 09-22-2003, 11:40 PM

Longhornmail

Alright so I only need two wires?I got this 67 without and engine.So I only need the wire from the battery and the purple wire from the harness correct?

Thanks alot.

Today I took everything off the radiator support and cleaned everything and stripped it down.Tommorow I am going to sandblast the back side of the radiator support and paint it.I am also going to order a new bushings and hardware from early classic enterprise.The firewall also got stripped and primered.

The front clip should be back on in a few weeks.And then a motor and trans are next.Woohoo.

I am also ordering a eagle rotating assembly to build a 383 for my 69.

Looks like things might be coming along.

09-22-2003, 11:40 PM	#1
c-tenkid Registered User Join Date: Apr 2003 Location: Festus mo Posts: 370	Longhornmail Alright so I only need two wires?I got this 67 without and engine.So I only need the wire from the battery and the purple wire from the harness correct? Thanks alot. Today I took everything off the radiator support and cleaned everything and stripped it down.Tommorow I am going to sandblast the back side of the radiator support and paint it.I am also going to order a new bushings and hardware from early classic enterprise.The firewall also got stripped and primered. The front clip should be back on in a few weeks.And then a motor and trans are next.Woohoo. I am also ordering a eagle rotating assembly to build a 383 for my 69. Looks like things might be coming along. __________________ 69 c-10 lwb,Converted to 4x4,dana 44f,12blt,4 inch lift,vortec headed 355,th350/np203 34x10.50x15 swamper tsl's



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.