NC SBC Top End Parts

[frednoah]

I'm in the process of swapping the top end of my 350 over to a Vortec head setup. All of the parts listed (except the vintage intake) came out of my perfectly running truck within the last week and a half.

If you don't like the price, shoot me an offer, worst I can say is no. Buyer to pay actual shipping on all items.

Still Available
2. 1" Carb spacer - Can be used with Spread or Square bore carbs. $10


5. Edelbrock Tarantula Intake. Cool vintage intake. From what I read online, this is the predecessor of the Victor Jr intake. Perfect topper for a period build. $70





Sold Items:
1. Set of 882 Casting heads. Set up with screw in studs and guideplates. 2.02/1.60 valves. Come with a set of stamped roller tip rockers. SOLD
3. Edelbrock Performer intake. Part number 2101. In great used shape. Bolt on and run. SOLD
4. Edelbrock 600 cfm carb. Part number 1406. In good used shape, but is currently missing a piece of rod in the linkage between the throttle and choke flap. The rod can be sourced in a $10 kit from any Edelbrock supplier. SOLD LOCAL
6. SBC HEI distributor. Unsure of make. Has an Accel Supercoil on top of it. Can be seen in the above picture laying beside the Edelbrock Performer intake SOLD

[ScottH]

how many miles on the heads? would u mind getting me a shipping price on them to 08753?

thanks
Scott

[71Sleeper]

same question on the heads as above. shipping to 36870

[frednoah]

Being 100% honest here, I have zero idea how many miles are on the current setup. It was rebuilt before I bought it. I would guess less than 5k miles, as the truck really wasn't driveable due to issues with the brakes when I got it. I have put about 3k miles on it since I sorted out the brakes.

I will get some measurements and weights and see what shipping might run for you guys.

[frednoah]

Wow are those things heavy. Bathroom scale showed 48 lbs for one head. Figuring a few lbs worth of cardboard to package them safely.

50lbs package to both zips listed above was the same. Standard USPS 7day shipping is going to be around $27 per head.

[mrdana60]

By any chance the dist. For sale?

[jjzepplin]

I will take the heads If shipping is not too bad to 33578 or 33569. pm me info thanks. Sure they are 2.02's could you send pics of the valves?

[ScottH]

thats a good buy on the heads but gonna pass, thanks

[frednoah]

Originally Posted by jjzepplin

I will take the heads If shipping is not too bad to 33578 or 33569. pm me info thanks. Sure they are 2.02's could you send pics of the valves?

I've had a caliper on the valves. Granted it was a cheapo I got from Northern Tool. Readings were 2.017 and 1.599.

Shipping looks to be the same $26-27 per head that the other two were quoted.

[frednoah]

Originally Posted by mrdana60

By any chance the dist. For sale?

Sure is, I just forgot to take a picture of it by itself when I had the camera out.


6. SBC HEI distributor. Unsure of make. Has an Accel Supercoil on top of it. Can be seen in the above picture laying beside the Edelbrock Performer intake $50

[71Sleeper]

Will you do $250 shipped on the heads? If so I will take.

[jjzepplin]

I'll take them for quoted price $200 plus shipping.

[71Sleeper]

Frednoah, looks like jjzepplin has made it very clear he needs these heads more than I. To avoid any foreseen problems on who to sale the heads to, I am pulling out. This is a great deal on a nice set of heads.

[frednoah]

71 Sleeper, I think $250 is fair, and if you want them you were first in line. Let me know.

If you choose to pass, I'll move on to jjzepplin.

[jjzepplin]

I am sorry, I posted before I saw the offer from 71 sleeper. Let me know if he passes.

[mrdana60]

I ll take the dist. For 60 shipped?

[71Sleeper]

jjzepplin I am passing onto you. I was just going to set them up on the self for my next engine build, which is going to be a bit. This is a good deal, good luck. jjzepplin do you have a build thread going with your truck? Would like to check it out. Thinking of painting mine yellow.

[frednoah]

mrdana60, I think I can do that, but shoot me a zip code and let me look at the shipping quote before committing.

jjzepplin is up on the heads. pm incoming.

[mrdana60]

35960 is the zip. Can paypal tonight or in the morning.

[jjzepplin]

Thank you 71Sleeper. I don't have a build thread as I found this site a bit late. It has dana60 front 14 bolt rear (4.10's) 700r4 to a 203/205 splitter transfer case Tom Woods drive-shafts 406ci (moved forward two")40 gallon rear tank rs9000 ranchos serpentine system dual fans and a bunch of other stuff. Getting it going this year and painting it next year. Original color was yellow. Still don't know what to paint it yet.

[frednoah]

Heads are sold pending payment.

I totally spaced on the distributor. Will get it boxed up and check shipping tonight.

Anyone else interested in something? Make me an offer...

[mrdana60]

Make me a package deal with first intake. I want it too

[frednoah]

pm coming your way

[frednoah]

Top post updated. Vintage Intake and Carb spacer are only two items left. Make me some offers and get em outta my garage