VA Inline Six Parts for sale

[ctandc]

Not going to be reusing the six cylinder. Selling everything off. I’ll be posting pictures shortly.

Power steering pump and brackets $100 + shipping (Currently CaptainFab is first in line for this. If he passes the next to post here or PM me gets it)

This was pulled off a '79 Camaro with the NON-integrated head 250. I planned on using a double groove harmonic balancer (for a ’79 Camaro 250 – they are available new for @ $60) and a double groove water pump pulley for the same vehicle. You’d also need to use the ’79 Camaro 250 water pump.

BRAND NEW IN THE BOX (NEVER USED) Skip White Performance HEI for the 194/230/250/292 Complete with cap, rotor, coil etc $60 + shipping

’65 Chevy C10 Custom Cab Aluminum Grille $180+ shipping
This thing was almost perfect. I decided to strip the anodizing, as it was clouded in a couple of spots. I planned on sanding / polishing it out. I’ve completed a good bit, and it needs a couple of small dings worked out. Simply haven’t had time to work on it. I’ll take pics how it sits. If no takers, I’ll make time to finish it up and of course the price will reflect that.

All engine parts are from a ’65 C10 230, unless otherwise noted:

Oil Pan VGC $25 + shipping

Valve cover VGC $25 + shipping

Alternator (was working /charging fine before I tore down the truck) $25 + shipping

OEM metal fuel lines from carb to fuel pump $15 + shipping

Original 230 carb (ran fine – I’m sure it could use a rebuild) $45 + shipping

Intake manifold $40 + shipping

Cylinder head COMPLETE (again ran fine 150K miles) $50 + shipping

Set of 6 rods in good shape w/ stock pistons still attached (one piston has a cracked spot on the lower ring land) $30 + shipping

Crankshaft (needs polishing – journals measured good) $50 + shipping

Flywheel (3 speed manual) in very good shape $40 + shipping
Used pressure plate and clutch. Worked fine. $30 + shipping

Manual transmission bellhousing in VGC $40 + shipping

3 speed manual transmission, worked fine $75 + shipping

Timing Cover VGC (it’s been cleaned and pretty much stripped) $20 + shipping

Pushrod covers $15 + shipping

I’ve got the entire valvetrain (lifters, rockers, pushrods) all in good used shape, all bagged with cylinder number if someone needs some spares. Make me an offer

’65 230 block – cleaned, degreased, broke the honed the cylinder with a deglazer (stone type) $50 + the ride.

[Captainfab]

Payment sent for the PS pump and brackets.

I'll take the grill pending pics.

[sigshooter]

I could use the fuel line...... do you have pics? also shipping to 74464

Thanks

[rbuckin111]

How much shipping on the HEI to 85205? Thanks

[tkeduk8r]

second in line on the HEI....
--Mike

[ctandc]

Originally Posted by Captainfab

Payment sent for the PS pump and brackets.

I'll take the grill pending pics.

Payment received. Got tied up this weekend. I'll dig up a box for the pump and brackets tonight and get it shipped out asap.

I'll get the grille out, clean it off and take pics and post them as well.

[ctandc]

Originally Posted by rbuckin111

How much shipping on the HEI to 85205? Thanks

$70 shipped via USPS parcel post.

[ctandc]

Originally Posted by sigshooter

I could use the fuel line...... do you have pics? also shipping to 74464

Thanks

I have a ball game to attend this evening, but I hope to get pics of all the parts up in the next day or so. Bear with me, I got really slammed over the weekend and it wasn't expected.

[rbuckin111]

I will take the HEI. Please pm me payment info and I will get it out to you. Thanks!

[rbuckin111]

Payment for HEI sent via paypal 5/7/12. Please advise on status of shipping. Thanks!

[ctandc]

Originally Posted by Captainfab

Payment sent for the PS pump and brackets.

I'll take the grill pending pics.

I was going to PM you, but I wanted to post here. I received the payment for the power steering pump / brackets. I got tasked to take a last minute project at work and I haven't even had a chance to even take pictures of the grille and other parts. I want to apologize to CaptainFab for not getting the pump / brackets shipped out. I buy and sell a good bit online and I know how frustrating it is to have to wait on a part I need. Normally I'm able to ship parts at the post office near my office during my lunch hour. I haven't been working out of my normal office during this project. I don't have a box that will work with the power steering pump / brackets so I'll bag it up in the morning and buy a box at the post office tomorrow during lunch.

Again, I apologize for any convenience. I also want to apologize to any potential buyers, I haven't even had a chance to take pics of the other parts.

[ctandc]

Originally Posted by rbuckin111

Payment for HEI sent via paypal 5/7/12. Please advise on status of shipping. Thanks!

I want to apologize to you as well. Payment was received. HEI is still in it's box, I'll ship it out tomorrow as well. I'll email tracking numbers.

Sorry for any inconvenience.

[Captainfab]

Not a big deal for me, I'm not waiting on them. I know about being busy, I work 70-75 hours a week. I appreciate you letting us know what the status is. I'm not sure if that pump and brackets will fit into a large flat rate box or not. That would save you having to buy a box.

Originally Posted by ctandc

I was going to PM you, but I wanted to post here. I received the payment for the power steering pump / brackets. I got tasked to take a last minute project at work and I haven't even had a chance to even take pictures of the grille and other parts. I want to apologize to CaptainFab for not getting the pump / brackets shipped out. I buy and sell a good bit online and I know how frustrating it is to have to wait on a part I need. Normally I'm able to ship parts at the post office near my office during my lunch hour. I haven't been working out of my normal office during this project. I don't have a box that will work with the power steering pump / brackets so I'll bag it up in the morning and buy a box at the post office tomorrow during lunch.

Again, I apologize for any convenience. I also want to apologize to any potential buyers, I haven't even had a chance to take pics of the other parts.

[rbuckin111]

I am good here too. Appreciate the response. We gotta keep working to support our "habit," right?

[ctandc]

Originally Posted by Captainfab

Not a big deal for me, I'm not waiting on them. I know about being busy, I work 70-75 hours a week. I appreciate you letting us know what the status is. I'm not sure if that pump and brackets will fit into a large flat rate box or not. That would save you having to buy a box.

Shipped via USPS today. I'll send tracking # via PM shortly.

[ctandc]

Originally Posted by rbuckin111

I am good here too. Appreciate the response. We gotta keep working to support our "habit," right?

Unfortunately, until I hit the lottery that is.

HEI Shipped today USPS.

PM coming with tracking #.

Thanks.

[rbuckin111]

Received HEI as promised. Thank you!

[Captainfab]

I received the power steering pump and brackets today also.

Thanks again