1967 C10 Armrest bolts?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

j1970GMC · 05-23-2012, 11:27 PM

Hi Everyone,

I recently bought arm rests for my 67 C10.

What are people using to secure the arm rests to the door panels?

Seems like a typical nut an bolt wouldn't hold the armrest on.

Any help is appreciated.

Stevo427 · 05-23-2012, 11:54 PM

Mounts should be in the door itself.

**LockDoc** · 05-24-2012, 08:56 AM

-
Stevo is correct, the nut is welded on the inside of the door and they use a 1/4-20 x 1 1/4" long Phillips head screw.

LockDoc

j1970GMC · 05-24-2012, 10:32 AM

Thanks for the help guys! I'll get a couple 1/4-20 x 1 1/4" screws.

Thanks again.

05-23-2012, 11:27 PM	#1
j1970GMC Registered User Join Date: Aug 2010 Location: Northern CA Posts: 185	1967 C10 Armrest bolts?? Hi Everyone, I recently bought arm rests for my 67 C10. What are people using to secure the arm rests to the door panels? Seems like a typical nut an bolt wouldn't hold the armrest on. Any help is appreciated.

05-23-2012, 11:54 PM	#2
Stevo427 Registered User Join Date: Sep 2011 Location: United States Posts: 163	Re: 1967 C10 Armrest bolts?? Mounts should be in the door itself.

05-24-2012, 08:56 AM	#3
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,395	Re: 1967 C10 Armrest bolts?? - Stevo is correct, the nut is welded on the inside of the door and they use a 1/4-20 x 1 1/4" long Phillips head screw. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

05-24-2012, 10:32 AM	#4
j1970GMC Registered User Join Date: Aug 2010 Location: Northern CA Posts: 185	Re: 1967 C10 Armrest bolts?? Thanks for the help guys! I'll get a couple 1/4-20 x 1 1/4" screws. Thanks again.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.