CA Rebuilt OEM Truck Tilt Column - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**leddzepp** · 06-04-2012, 02:50 AM

Here is a very nice true truck tilt column that was rebuilt with all new parts: AC Delco harness, shift pointer, indicator lens, hazard knob, upper and lower bearings, upper and lower rubber, Neutral safety switch, floor mounting bracket. Included is a nice original set of original levers. The tilt is very tight, and the shifter/detent spring is tight as well...the hole is not wallered out. It has the correct linkage attachment hardware so that all you need to do is bolt up your linkage and go. The finish is correct satin, and only has a few minor scuffs at the bottom, as it was pulled in and out of a project truck that got parted out, not even seen when installed.

$450 Shipped CONUS (Shipped means properly packed, sent via Fed Ex ground, with a tracking number, and a declared value for the full purchase price)

**DeadheadNM** · 06-04-2012, 08:51 AM

I'll take it. PM payment details when poss. Thx. Pete

**29od1** · 06-04-2012, 08:57 AM

Looks like a very decent price for all that's been done to it.

shawno72 · 06-04-2012, 09:21 AM

Sweet deal for sure!
Posted via Mobile Device

06-04-2012, 02:50 AM	#1
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,004	Rebuilt OEM Truck Tilt Column Here is a very nice true truck tilt column that was rebuilt with all new parts: AC Delco harness, shift pointer, indicator lens, hazard knob, upper and lower bearings, upper and lower rubber, Neutral safety switch, floor mounting bracket. Included is a nice original set of original levers. The tilt is very tight, and the shifter/detent spring is tight as well...the hole is not wallered out. It has the correct linkage attachment hardware so that all you need to do is bolt up your linkage and go. The finish is correct satin, and only has a few minor scuffs at the bottom, as it was pulled in and out of a project truck that got parted out, not even seen when installed. $450 Shipped CONUS (Shipped means properly packed, sent via Fed Ex ground, with a tracking number, and a declared value for the full purchase price) Attached Images __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

06-04-2012, 08:51 AM	#2
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,372	Re: Rebuilt OEM Truck Tilt Column I'll take it. PM payment details when poss. Thx. Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

06-04-2012, 08:57 AM	#3
29od1 Senior Member Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: Rebuilt OEM Truck Tilt Column Looks like a very decent price for all that's been done to it.

06-04-2012, 09:21 AM	#4
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Rebuilt OEM Truck Tilt Column Sweet deal for sure! Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.