AL WTB pair of bucket seats and one rally wheel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68Timber · 05-25-2012, 06:08 PM

My CUCV came with the crappy S10 bucket seats that are thin and shot. I'd like a pair of high back buckets from a Blazer or Burb that are structurally sound with good foam but needing to be recovered. 73-87 seats are preferred but I will consider a cloth set from an 88-98 truck. I'm going to put my seat covers on them anyway, so paying for a nice set would be a waste. Also, I don't have a rim for my spare, I'm looking for one 4x4 rally wheel. Ugly preferred, I'm going to paint it black anyway.

junior43 · 05-30-2012, 01:28 PM

I have a tan set out of a 77 Jimmy. Two front buckets and a rear seat. Drivers seat needs foam repaired, the other two are nice. Could possibly come up with a spare wheel also, but you wouldn't want to pay shipping.
Posted via Mobile Device

shawno72 · 05-30-2012, 01:31 PM

I have a good rally wheel in nice condition. $45 plus shipping, let me know.

68Timber · 05-30-2012, 02:44 PM

Quote:

Originally Posted by junior43

I have a tan set out of a 77 Jimmy. Two front buckets and a rear seat. Drivers seat needs foam repaired, the other two are nice. Could possibly come up with a spare wheel also, but you wouldn't want to pay shipping.
Posted via Mobile Device

If the foam is deteriorating it's probably too far gone for me.

Quote:

Originally Posted by shawno72

I have a good rally wheel in nice condition. $45 plus shipping, let me know.

shawno, CA is too far on shipping to make sense but thanks.

shawno72 · 05-30-2012, 02:46 PM

No problem. Shipping would prob run about $20-25. Make me an offer. It's a real nice wheel.
Posted via Mobile Device

68Timber · 05-30-2012, 02:55 PM

Thanks, but a nice wheel is a waste for this application. I need a candidate for my sand blaster. I'm going to blast it and paint it black.

**michael bustamante** · 05-30-2012, 04:13 PM

i have a good passenger seat out of my 84 blazer, good foam bad cloth, no brackets. I also have 1 6 lug rallye but ship would be about 30 bucks im sure.

**Tim Christian** · 06-02-2012, 12:55 PM

I have a nice set of bucket seats can get you a picture if you would like?

68Timber · 06-02-2012, 07:51 PM

Quote:

Originally Posted by Tim Christian

I have a nice set of bucket seats can get you a picture if you would like?

Sounds good! Nice to hear from someone in the SE.

**Tim Christian** · 06-03-2012, 01:08 PM

68Timber · 06-03-2012, 01:53 PM

Looks good. How much do you want for them?

**Tim Christian** · 06-03-2012, 08:36 PM

I was wanting $200.00 but I am afraid what shipping would be

68Timber · 06-03-2012, 08:58 PM

Is that with the bases? I do like them. I may be able to pick them up or have them picked up.

**Tim Christian** · 06-03-2012, 09:22 PM

Yes that is complete. They are very nice actually the orginal covers would probably shampoo out real nice.

68Timber · 06-03-2012, 10:39 PM

Thanks and I'll take them. I will PM you for payment and to arrange pick up.

**Tim Christian** · 06-04-2012, 08:13 PM

Thanks John, I got the payment just let me know by thursday morning if you want to pick them up in VA or TN ? Thanks

68Timber · 06-05-2012, 09:33 AM

Please bring them to TN. These will NOT end up in my CUCV. They look correct for my 79, so they'll get cleaned up and installed in it. Which frees up another set for the CUCV.

05-25-2012, 06:08 PM	#1
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	WTB pair of bucket seats and one rally wheel My CUCV came with the crappy S10 bucket seats that are thin and shot. I'd like a pair of high back buckets from a Blazer or Burb that are structurally sound with good foam but needing to be recovered. 73-87 seats are preferred but I will consider a cloth set from an 88-98 truck. I'm going to put my seat covers on them anyway, so paying for a nice set would be a waste. Also, I don't have a rim for my spare, I'm looking for one 4x4 rally wheel. Ugly preferred, I'm going to paint it black anyway. __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

05-30-2012, 01:28 PM	#2
junior43 Registered User Join Date: Mar 2010 Location: Fairmount Indiana Posts: 143	Re: WTB pair of bucket seats and one rally wheel I have a tan set out of a 77 Jimmy. Two front buckets and a rear seat. Drivers seat needs foam repaired, the other two are nice. Could possibly come up with a spare wheel also, but you wouldn't want to pay shipping. Posted via Mobile Device

05-30-2012, 01:31 PM	#3
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: WTB pair of bucket seats and one rally wheel I have a good rally wheel in nice condition. $45 plus shipping, let me know. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

05-30-2012, 02:46 PM	#5
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: WTB pair of bucket seats and one rally wheel No problem. Shipping would prob run about $20-25. Make me an offer. It's a real nice wheel. Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

05-30-2012, 02:55 PM	#6
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: WTB pair of bucket seats and one rally wheel Thanks, but a nice wheel is a waste for this application. I need a candidate for my sand blaster. I'm going to blast it and paint it black. __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

05-30-2012, 04:13 PM	#7
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,836	Re: WTB pair of bucket seats and one rally wheel i have a good passenger seat out of my 84 blazer, good foam bad cloth, no brackets. I also have 1 6 lug rallye but ship would be about 30 bucks im sure. __________________ 1967custom

06-02-2012, 12:55 PM	#8
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Re: WTB pair of bucket seats and one rally wheel I have a nice set of bucket seats can get you a picture if you would like?

06-03-2012, 01:08 PM	#10
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Re: WTB pair of bucket seats and one rally wheel

06-03-2012, 01:53 PM	#11
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: WTB pair of bucket seats and one rally wheel Looks good. How much do you want for them? __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

06-03-2012, 08:36 PM	#12
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Re: WTB pair of bucket seats and one rally wheel I was wanting $200.00 but I am afraid what shipping would be

06-03-2012, 08:58 PM	#13
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: WTB pair of bucket seats and one rally wheel Is that with the bases? I do like them. I may be able to pick them up or have them picked up. __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

06-03-2012, 09:22 PM	#14
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Re: WTB pair of bucket seats and one rally wheel Yes that is complete. They are very nice actually the orginal covers would probably shampoo out real nice.

06-03-2012, 10:39 PM	#15
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: WTB pair of bucket seats and one rally wheel Thanks and I'll take them. I will PM you for payment and to arrange pick up. __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

06-04-2012, 08:13 PM	#16
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Re: WTB pair of bucket seats and one rally wheel Thanks John, I got the payment just let me know by thursday morning if you want to pick them up in VA or TN ? Thanks

06-05-2012, 09:33 AM	#17
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: WTB pair of bucket seats and one rally wheel Please bring them to TN. These will NOT end up in my CUCV. They look correct for my 79, so they'll get cleaned up and installed in it. Which frees up another set for the CUCV. __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.