Side Trim Removal

[CRGRS 66]

Originally Posted by jonzcustomshop

pull off your inner door panel, take off the inside door mechanism, so you can get your arm in the hole. use a pair of pliers to squish the inside of the clip and push out.if you get a few off one end, you should be able to slide the trim off the rest.
don't try to save the clips. they are cheap to replace, and if you try to save them you will screw up your trim.. I have found that they are pretty much a one time use clip ( the plastic ones)

Thanks a million for dumbing it down for me! I can change the door control while I am in there.