|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
06-09-2012, 08:18 PM
|
#1 |
|
Registered User
Join Date: Mar 2006
Location: Pittsburgh
Posts: 1,694
|
Wheel lug nut wrench size?
Hey guys I am converting my 67 C10 over from 6 to 5 lugs. I know the stud size is 1/2"-20 but there are different hex sizes also. I see they could be 3/4" or 13/16" So what did the 72 C10's run 3/4" or 13/16" wrench size?
Thanks, Nate
__________________
Nate 1967 short fleet Project Blue Goose 'If it don't bounce back... heeheehee you go hungry!" Blues Brothers |
|
|
|
06-09-2012, 11:47 PM
|
#2 |
|
Registered User
 
Join Date: May 2012
Location: Anton, Texas
Posts: 2,364
|
Re: Wheel lug nut wrench size?
best i can remember they were all 3/4, later years may be 13/16....
|
|
|
|
|
06-10-2012, 02:11 AM
|
#3 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: Wheel lug nut wrench size?
I have always used 3/4" on my 71.
 
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
06-10-2012, 11:10 AM
|
#4 |
|
Registered User
Join Date: Mar 2006
Location: Pittsburgh
Posts: 1,694
|
Re: Wheel lug nut wrench size?
Thanks,
__________________
Nate 1967 short fleet Project Blue Goose 'If it don't bounce back... heeheehee you go hungry!" Blues Brothers |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
