16.5"x 10" steel wheels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**richard2717** · 06-18-2012, 07:26 PM

I have four of them. I know the 16.5 is getting hard to find tires for so they probably are not popular but I was getting ready to scrap the trailer and thought I would see if they have any value other than scrap? Hub opening is about 4.75". They don't appear to be in too bad a shape but can't really tell the full story until I take them off. Which I would not do unless there is interest shown.

And it is a guess that they are 10" wide. One of them is off the rim on front side so I stuck the tape in and it stopped at almost 9" to the inside of the back of the tire. Tires are junk.

Thanks
Richard

duallyjams · 06-18-2012, 08:43 PM

I sold a pair of NOS for 100 each. They should be stamped with 16.5 / 9.75

**richard2717** · 06-18-2012, 11:29 PM

Thanks James. Which section you think they would be best advertised on, or does it matter? I was thinking like $150 plus the ride for all 4????

Richard

**special-K** · 06-19-2012, 06:11 AM

Prices really vary. I've bought a set used for $20 to paying $50 for one that looked about unused. They cost around $75 new when they were available and tire choices were good. Gotta figure they still need refinishing,so they never end up being a very cheap way to go. I'd try the 67-72 or 73-87 boards. They look like the wide ones,which are 9.75 x 16.5. Measure the back space cuz it varied on these. The ones sold for rears of C/20s & C/30s had more dish. The trailer wheels are closer to centered,but still with dish. They have a good usable back space.

duallyjams · 06-19-2012, 06:47 AM

These wheels are heavy so figure 25-28 a piece to ship.

**richard2717** · 06-19-2012, 09:03 PM

The rims are actually 11" wide.I just postedthem in the 67-72 parts board.

06-18-2012, 07:26 PM	#1
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	16.5"x 10" steel wheels I have four of them. I know the 16.5 is getting hard to find tires for so they probably are not popular but I was getting ready to scrap the trailer and thought I would see if they have any value other than scrap? Hub opening is about 4.75". They don't appear to be in too bad a shape but can't really tell the full story until I take them off. Which I would not do unless there is interest shown. And it is a guess that they are 10" wide. One of them is off the rim on front side so I stuck the tape in and it stopped at almost 9" to the inside of the back of the tire. Tires are junk. Thanks Richard Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

06-18-2012, 08:43 PM	#2
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 16.5"x 10" steel wheels I sold a pair of NOS for 100 each. They should be stamped with 16.5 / 9.75 __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

06-18-2012, 11:29 PM	#3
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: 16.5"x 10" steel wheels Thanks James. Which section you think they would be best advertised on, or does it matter? I was thinking like $150 plus the ride for all 4???? Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

06-19-2012, 06:11 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 16.5"x 10" steel wheels Prices really vary. I've bought a set used for $20 to paying $50 for one that looked about unused. They cost around $75 new when they were available and tire choices were good. Gotta figure they still need refinishing,so they never end up being a very cheap way to go. I'd try the 67-72 or 73-87 boards. They look like the wide ones,which are 9.75 x 16.5. Measure the back space cuz it varied on these. The ones sold for rears of C/20s & C/30s had more dish. The trailer wheels are closer to centered,but still with dish. They have a good usable back space. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-19-2012, 06:47 AM	#5
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 16.5"x 10" steel wheels These wheels are heavy so figure 25-28 a piece to ship. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

06-19-2012, 09:03 PM	#6
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: 16.5"x 10" steel wheels The rims are actually 11" wide.I just postedthem in the 67-72 parts board. __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.