|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-30-2003, 07:09 PM
|
#1 |
|
Professional Grade
Join Date: May 2003
Location: Fort McMurray, Alberta
Posts: 7,915
|
Hey everyone :) Couple questions...
Alright, so I got my new carb put on, I just need to know what torque to set the mounting bolts at, and I need suggestions for a manual choke cable setup (I don't have the proper intake for the carb, only the choke is affected)
I want something that looks alright, and won't be very visible...
__________________
1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) |
|
|
|
09-30-2003, 09:04 PM
|
#2 |
|
Account Suspended
Join Date: Mar 2003
Location: ** THE FALL GUY **CHICAGO IL
Posts: 5,883
|
tighten till snug...should be able to get a choke cable at your local parts house...should hide very well under the air cleaner
|
|
|
|
|
09-30-2003, 09:09 PM
|
#3 |
|
Professional Grade
Join Date: May 2003
Location: Fort McMurray, Alberta
Posts: 7,915
|
Well, got it all put together, just opened the choke all the way and left it all the way open, went to turn the engine over, it turned three or four times, then my battery died, again =/
__________________
1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) |
|
|
|
|
09-30-2003, 11:11 PM
|
#4 |
|
Professional Grade
Join Date: May 2003
Location: Fort McMurray, Alberta
Posts: 7,915
|
Well, just tried again, she fired up after some serious pedal pumping (no choke right now) died right away due to some massive backfiring, definitly timing, I had a guy over who was screwing with the distro cap...
__________________
1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
