GM Bucket seat install - The 1947 - Present Chevrolet & GMC Truck Message Board Network

McCoyAZ · 07-07-2012, 11:00 AM

I am messing around today with installing a set of bucket seats out of an 05 Tahoe into my 64 short step.

Bought these 2nd hand and I was looking at the bottom rails and it looks like it may be missing a piece.

Could you look at this image and tell me if these risers are supposed to be on both rails or just the one side.
Thanks

SFTorange · 07-07-2012, 11:06 AM

I think you're right.... If nobody responds by tomorrow I can double check when I can look at my truck. Shouldn't be a hard fix though.
Posted via Mobile Device

McCoyAZ · 07-07-2012, 11:14 AM

Thanks much.

The odd thing is: The rear one bolts into place but the front one is riveted on so not sure how it would have disappeared.

SFTorange · 07-07-2012, 11:32 AM

Yeah, that is odd...
Posted via Mobile Device

Budman56 · 07-07-2012, 11:57 AM

Yes you are missing some offset brackets, but they should still mount up in your truck.

Rich 5150 69 · 07-07-2012, 07:15 PM

The extra brackets that are on one side of both seat tracks goes to the center, they sat down into the center jump seat plate that all bolted down together, I have the same seats with the center console........

07-07-2012, 11:00 AM	#1
McCoyAZ Registered User Join Date: Aug 2011 Location: Kingman, AZ Posts: 1,574	GM Bucket seat install I am messing around today with installing a set of bucket seats out of an 05 Tahoe into my 64 short step. Bought these 2nd hand and I was looking at the bottom rails and it looks like it may be missing a piece. Could you look at this image and tell me if these risers are supposed to be on both rails or just the one side. Thanks Attached Images __________________ http://s994.photobucket.com/albums/af62/ScottAz2/

07-07-2012, 11:06 AM	#2
SFTorange Registered User Join Date: Apr 2010 Location: Billings, MT Posts: 417	Re: GM Bucket seat install I think you're right.... If nobody responds by tomorrow I can double check when I can look at my truck. Shouldn't be a hard fix though. Posted via Mobile Device __________________ The Brown Truck http://67-72chevytrucks.com/vboard/s...d.php?t=437222

07-07-2012, 11:14 AM	#3
McCoyAZ Registered User Join Date: Aug 2011 Location: Kingman, AZ Posts: 1,574	Re: GM Bucket seat install Thanks much. The odd thing is: The rear one bolts into place but the front one is riveted on so not sure how it would have disappeared. __________________ http://s994.photobucket.com/albums/af62/ScottAz2/

07-07-2012, 11:32 AM	#4
SFTorange Registered User Join Date: Apr 2010 Location: Billings, MT Posts: 417	Re: GM Bucket seat install Yeah, that is odd... Posted via Mobile Device __________________ The Brown Truck http://67-72chevytrucks.com/vboard/s...d.php?t=437222

07-07-2012, 11:57 AM	#5
Budman56 Registered User Join Date: Aug 2011 Location: Patterson California Posts: 1,133	Re: GM Bucket seat install Yes you are missing some offset brackets, but they should still mount up in your truck. __________________ MY 65 C20 BUILD http://67-72chevytrucks.com/vboard/s...d.php?t=483346 ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/

07-07-2012, 07:15 PM	#6
Rich 5150 69 Registered User Join Date: Nov 2009 Location: Galt, Calif Posts: 2,437	Re: GM Bucket seat install The extra brackets that are on one side of both seat tracks goes to the center, they sat down into the center jump seat plate that all bolted down together, I have the same seats with the center console........ __________________ `64 C10 vortec 350/350/373 posi `69 RS/SS 350/350/308 `37 Ford 406/350/324 traclock `68 Dart 370/904/323 suregrip



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.