Bbc Motor Towers, Suburban Spare Tire Well, Suburban Rear Interior Trim On Ebay - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smonty · 09-30-2003, 07:45 PM

I have a few parts on Ebay that someone may need. I have a set of BBC Motor towers w/mounts, a suburban rear spare tire well and a set of rear interior trim for a suburban. I will be scrounging around the place to see what I have that I don't need and will be putting some more parts up for auction. Thanks for looking!

Link: http://cgi6.ebay.com/ebaymotors/ws/e...&since=-1&rd=1

Ernie
smonty46@hotmail.com

jays68yak · 09-30-2003, 08:10 PM

you should put in the auction what year the motor mounts are out of. So that people know if its the 67-71 or the 72's.

smonty · 09-30-2003, 10:15 PM

These came off a 70 Suburban but I am not sure what they originally came off of. Hopefully, someone who knows more than me will look at the picture of the towers and know what year the towers/mounts are from as I truly don't know. I have never built a big block truck so I am not too knowlegeable in this area. I do know that they are big block towers that work on our trucks and that is about it. If anyone knows exactly what year they are off of I would really like to know. Thanks for the response to my post.

Ernie

jays68yak · 09-30-2003, 10:35 PM

do you have a close up pic of one on its side?

smonty · 09-30-2003, 11:15 PM

I will take a picture tomorrow from the side of one of the mounts.

Thanks for the response.

Ernie

smonty · 10-01-2003, 07:36 PM

I sent you an email. Would you email me your email address and I will send you some pictures. Perhaps you could post them on the board as I have not had any luck posting pictures here.

Thanks,

Ernie
smonty46@hotmail.com

jmanz69 · 10-01-2003, 07:43 PM

From this far away they look like 72 towers, but would need better pics to really kow. If they are 72 towers, you should get a good price on ebay for them.

smonty · 10-01-2003, 07:47 PM

I wish I knew for sure then I could post the info on EBAY. What is the major difference between the 67-71 and the 72's?

Ernie

jmanz69 · 10-01-2003, 07:51 PM

the 67-71 mounts are more prone to breaking, and they mount the engine up higher in the frame. The 72 mounts are completely encased. If the rubber mount gives out, the engine is still held down by the metal. They are known as "clamshell". Really a better design. Plus the rubber mounts are way cheaper than the 67-71 type. I am selling a set now on the board. I have seen them go for as much as $120 on ebay, but I have also seen them go for $30, so it's a gamble. Have to have them there at the right time. Looks like yours are doing good.

jays68yak · 10-01-2003, 08:07 PM

heres a set i bought on here not long ago, then once i sold my project sold them on ebay.
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2431357053

6772king · 10-01-2003, 08:58 PM

not real sure but those look like 73 and up mounts I think the factory 72's just had one rib instead of two (on the top wear they bolt to the frame)

smonty · 10-01-2003, 09:44 PM

Thanks for the info and the picture. I think mine have to be the 72 type.

*rickspickuppart* · 10-01-2003, 09:53 PM

6772 king is right they are 73 and up mounts 72 style have upper bolt holes closer together rick

junkyardjohn · 10-01-2003, 10:15 PM

THOSE ARE 73 ON UP MOTOR MOUNTS. WHOEVER GETS THEM IS GOING TO BE PISSED WHEN THEY FIND OUT. 72 MOTOR MOUNTS GO FOR $80 - $100 WHERE 73 UP MOUNTS GO FOR ABOUT $15-$20

smonty · 10-02-2003, 05:43 AM

I had no idea what year these mounts were from as they were on a suburban I bought. I am going to end the auction for them. Thanks for the info. All the responses that I received by email told me that they were 72 models.

smonty · 10-02-2003, 09:01 PM

I ended the auction on the BBC Towers as I am sure that they are 73+ towers instead of 72. The easiest way for me to tell now is that the 72's have one rib on them while the 73+ have two. Now I know so I am going to look for the 72's. Thanks for all the info I received on differentiating between the two from the board members.

Ernie

72gmcshorty · 10-03-2003, 12:20 AM

you don't have a Big block fan shroud perhaps? Email me at ivank@dccnet.com let me know. Thanks

09-30-2003, 07:45 PM	#1
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	Bbc Motor Towers, Suburban Spare Tire Well, Suburban Rear Interior Trim On Ebay I have a few parts on Ebay that someone may need. I have a set of BBC Motor towers w/mounts, a suburban rear spare tire well and a set of rear interior trim for a suburban. I will be scrounging around the place to see what I have that I don't need and will be putting some more parts up for auction. Thanks for looking! Link: http://cgi6.ebay.com/ebaymotors/ws/e...&since=-1&rd=1 Ernie smonty46@hotmail.com __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project Last edited by smonty; 09-30-2003 at 07:47 PM.

09-30-2003, 08:10 PM	#2
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	you should put in the auction what year the motor mounts are out of. So that people know if its the 67-71 or the 72's. __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

09-30-2003, 10:15 PM	#3
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	Reply to jays68yak These came off a 70 Suburban but I am not sure what they originally came off of. Hopefully, someone who knows more than me will look at the picture of the towers and know what year the towers/mounts are from as I truly don't know. I have never built a big block truck so I am not too knowlegeable in this area. I do know that they are big block towers that work on our trucks and that is about it. If anyone knows exactly what year they are off of I would really like to know. Thanks for the response to my post. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

09-30-2003, 10:35 PM	#4
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	do you have a close up pic of one on its side? __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

09-30-2003, 11:15 PM	#5
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	reply to jays68yak I will take a picture tomorrow from the side of one of the mounts. Thanks for the response. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

10-01-2003, 07:36 PM	#6
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	Reply to jays68yak I sent you an email. Would you email me your email address and I will send you some pictures. Perhaps you could post them on the board as I have not had any luck posting pictures here. Thanks, Ernie smonty46@hotmail.com __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

10-01-2003, 07:43 PM	#7
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	From this far away they look like 72 towers, but would need better pics to really kow. If they are 72 towers, you should get a good price on ebay for them.

10-01-2003, 07:47 PM	#8
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	Reply to jmanz69 I wish I knew for sure then I could post the info on EBAY. What is the major difference between the 67-71 and the 72's? Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

10-01-2003, 07:51 PM	#9
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	the 67-71 mounts are more prone to breaking, and they mount the engine up higher in the frame. The 72 mounts are completely encased. If the rubber mount gives out, the engine is still held down by the metal. They are known as "clamshell". Really a better design. Plus the rubber mounts are way cheaper than the 67-71 type. I am selling a set now on the board. I have seen them go for as much as $120 on ebay, but I have also seen them go for $30, so it's a gamble. Have to have them there at the right time. Looks like yours are doing good.

10-01-2003, 08:07 PM	#10
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	heres a set i bought on here not long ago, then once i sold my project sold them on ebay. http://cgi.ebay.com/ebaymotors/ws/eB...tem=2431357053 __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

10-01-2003, 08:58 PM	#11
6772king Registered User Join Date: Feb 2002 Location: grove city pa usa Posts: 628	not real sure but those look like 73 and up mounts I think the factory 72's just had one rib instead of two (on the top wear they bolt to the frame) __________________ 67 chevy short step 2wd 427 71 chevy short fleet 4x4 396 72 gmc jimmy 2wd 377 71 chevy blazer 4x4 454 69 chevy longhorn 5.9l cummins 72 chevy 400 2wd custom camper 67 chevy lwb 4x4 454-in pieces 67 chevy panel soon 4x4-400 67 gmc dump 4x4 1 ton-305 WTF!! 72 chevy 3/4 ton 4x4 burb 350 70 chevy panel 2wd 302 5 speed tko "THERE IS NO REPLACMENT FOR DISPLACMENT"!!!!!!!

10-01-2003, 09:44 PM	#12
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	Reply Thanks for the info and the picture. I think mine have to be the 72 type. __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

10-01-2003, 09:53 PM	#13
rickspickuppart Account Suspended Join Date: Jul 2003 Posts: 1,284	6772 king is right they are 73 and up mounts 72 style have upper bolt holes closer together rick

10-01-2003, 10:15 PM	#14
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	THOSE ARE 73 ON UP MOTOR MOUNTS. WHOEVER GETS THEM IS GOING TO BE PISSED WHEN THEY FIND OUT. 72 MOTOR MOUNTS GO FOR $80 - $100 WHERE 73 UP MOUNTS GO FOR ABOUT $15-$20 __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

10-02-2003, 05:43 AM	#15
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	Reply I had no idea what year these mounts were from as they were on a suburban I bought. I am going to end the auction for them. Thanks for the info. All the responses that I received by email told me that they were 72 models. __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project



Register or Log In To remove these advertisements.

10-02-2003, 09:01 PM	#16
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	reply I ended the auction on the BBC Towers as I am sure that they are 73+ towers instead of 72. The easiest way for me to tell now is that the 72's have one rib on them while the 73+ have two. Now I know so I am going to look for the 72's. Thanks for all the info I received on differentiating between the two from the board members. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

10-03-2003, 12:20 AM	#17
72gmcshorty Registered User Join Date: Jul 2001 Location: North Delta, British Columbia Posts: 1,344	you don't have a Big block fan shroud perhaps? Email me at ivank@dccnet.com let me know. Thanks __________________ 1992 Gmc 2wd 1972 Chevy Blazer 2wd

Register or Log In To remove these advertisements.