Drop shocks for a 98 tahoe with 2" spindle/3" spring drop - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bagged74 · 07-12-2012, 05:28 PM

Is it getting into the inner fender or the lip on the edge of the fender? Mine was rubbing hard on the fender lip until I rolled them. Mines all good now that they are rolled.
Posted via Mobile Device

bagged74 · 07-12-2012, 05:29 PM

If I remember right I have stock S-10 shocks on the front of mine
Posted via Mobile Device

Cole Trickle · 07-12-2012, 05:51 PM

Quote:

Originally Posted by bagged74

Is it getting into the inner fender or the lip on the edge of the fender? Mine was rubbing hard on the fender lip until I rolled them. Mines all good now that they are rolled.
Posted via Mobile Device

Fender lips are rolled so its all good there...

Its not hitting at the very top but I probably have 3" of clearance before it hits

The monroes are floaty and its rubbing the inner fender well HARD!!

07-12-2012, 05:28 PM	#1
bagged74 its just $$$$$ Join Date: Jul 2003 Location: OK Posts: 2,078	Re: Drop shocks for a 98 tahoe with 2" spindle/3" spring drop Is it getting into the inner fender or the lip on the edge of the fender? Mine was rubbing hard on the fender lip until I rolled them. Mines all good now that they are rolled. Posted via Mobile Device

07-12-2012, 05:29 PM	#2
bagged74 its just $$$$$ Join Date: Jul 2003 Location: OK Posts: 2,078	Re: Drop shocks for a 98 tahoe with 2" spindle/3" spring drop If I remember right I have stock S-10 shocks on the front of mine Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.