VA Speedwarning tach dash with wiring and buzzer choose your options!!! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 07-12-2012, 03:36 AM

Quote:

Originally Posted by DeadheadNM

Definitely interested. Sounds like $750 shipped for the cluster as I've described plus $145 for a wood grain bezel and glovebox door (woodgrain applied to the aluminum panel - not whole door) from CSM. Correct?

If so, lets see some pics of the cluster components when possible. Thanks, Pete

Sorry for the delay. Here are the components. Let me know if you have any questions.
Posted via Mobile Device

**DeadheadNM** · 07-12-2012, 08:32 AM

No worries I appreciate the pics. I don't see the vac gauge/vac lens. 80lb oil gauge? OEM printed circuit? Thanks, Pete

VA72C10 · 07-13-2012, 03:05 PM

Quote:

Originally Posted by DeadheadNM

No worries I appreciate the pics. I don't see the vac gauge/vac lens. 80lb oil gauge? OEM printed circuit? Thanks, Pete

is that all I forgot?

wow, serves me right for taking pics and posting so late at night. I will get the correct pics in a few minutes...

VA72C10 · 07-13-2012, 04:07 PM

Here are the rest of the pictures. The printed circuit has no burns but does have some separation as you can hopefully see in the picture holding it to the light. I personally would use a new reproduction since the circuits are 40+ yrs old.
Posted via Mobile Device

VA72C10 · 07-13-2012, 04:27 PM

Here is the vac lens (new). My only other isn't up to par with the rest of the dash. I do have another good original printed circuit without burns or separation but is was scratched at some point (likely removal from the truck) so its not perfect either.
Posted via Mobile Device

VA72C10 · 07-13-2012, 04:28 PM

The white circuit is made in the usa. The green imho looks better (not that it is seen) but is an import
Posted via Mobile Device

**DeadheadNM** · 07-13-2012, 08:13 PM

Looks great. I would defer to your judgement on the printed circuit and use a repro if you think best (USA repro). If OK with you I'd send half now half when complete for total of $750 shipped on the tach/vac s/w 80lb oil gauge cluster all OEM gauges with buzzer and harness. Even though I'm sober now

I'd still consider the woodgrain from CSM as discussed. Let me know when possible. Thanks, Pete

VA72C10 · 07-13-2012, 10:53 PM

Half now half when complete will work fine. I don't have any of the csm panels so its best to go direct to him so you don't pay shipping twice unless you want me to install the bezel w/ adjuster knob. The bezel is 95 and glovebox insert is also 95 (plus shipping) so it is 190 plus shipping for those. If I'm cutting the bezel id need 25 mainly because of the risk when cutting that hole. I cut the woodgrain first with a new utility blade then drill the hole through the plastic bezel. Pm sent with payment info.
Posted via Mobile Device

**DeadheadNM** · 07-14-2012, 09:00 AM

Quote:

Originally Posted by VA72C10

Half now half when complete will work fine. I don't have any of the csm panels so its best to go direct to him so you don't pay shipping twice unless you want me to install the bezel w/ adjuster knob. The bezel is 95 and glovebox insert is also 95 (plus shipping) so it is 190 plus shipping for those. If I'm cutting the bezel id need 25 mainly because of the risk when cutting that hole. I cut the woodgrain first with a new utility blade then drill the hole through the plastic bezel. Pm sent with payment info.
Posted via Mobile Device

Thanks Jonathan. For now I'll go with a new woodgrain bezel as per post #1 and hold off on CSM. PM sent. Thanks, Pete

07-12-2012, 08:32 AM	#27
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,481	Re: Speedwarning tach dash with wiring and buzzer choose your options!!! No worries I appreciate the pics. I don't see the vac gauge/vac lens. 80lb oil gauge? OEM printed circuit? Thanks, Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

07-13-2012, 04:07 PM	#29
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Speedwarning tach dash with wiring and buzzer choose your options!!! Here are the rest of the pictures. The printed circuit has no burns but does have some separation as you can hopefully see in the picture holding it to the light. I personally would use a new reproduction since the circuits are 40+ yrs old. Posted via Mobile Device Attached Images __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-13-2012, 04:27 PM	#30
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Speedwarning tach dash with wiring and buzzer choose your options!!! Here is the vac lens (new). My only other isn't up to par with the rest of the dash. I do have another good original printed circuit without burns or separation but is was scratched at some point (likely removal from the truck) so its not perfect either. Posted via Mobile Device Attached Images __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-13-2012, 04:28 PM	#31
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Speedwarning tach dash with wiring and buzzer choose your options!!! The white circuit is made in the usa. The green imho looks better (not that it is seen) but is an import Posted via Mobile Device __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-13-2012, 08:13 PM	#32
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,481	Re: Speedwarning tach dash with wiring and buzzer choose your options!!! Looks great. I would defer to your judgement on the printed circuit and use a repro if you think best (USA repro). If OK with you I'd send half now half when complete for total of $750 shipped on the tach/vac s/w 80lb oil gauge cluster all OEM gauges with buzzer and harness. Even though I'm sober now I'd still consider the woodgrain from CSM as discussed. Let me know when possible. Thanks, Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

07-13-2012, 10:53 PM	#33
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Speedwarning tach dash with wiring and buzzer choose your options!!! Half now half when complete will work fine. I don't have any of the csm panels so its best to go direct to him so you don't pay shipping twice unless you want me to install the bezel w/ adjuster knob. The bezel is 95 and glovebox insert is also 95 (plus shipping) so it is 190 plus shipping for those. If I'm cutting the bezel id need 25 mainly because of the risk when cutting that hole. I cut the woodgrain first with a new utility blade then drill the hole through the plastic bezel. Pm sent with payment info. Posted via Mobile Device __________________ Looking for a 67-72 swb or blazer project in or around VA.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.