Question for those of you whom have installed a Blazer tank into their trucks ?? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mudder · 10-02-2003, 01:17 PM

RON WOODGEARD · 10-03-2003, 07:13 AM

Nice job, Mario, but mine is a stepside.

Ron

Quote:

Originally posted by 72MARIO
filler.

72MARIO · 10-03-2003, 09:06 AM

Opps.

red71cheyenne · 10-03-2003, 11:19 AM

Like you, I went with the garden hose method for a long time then finally got tired of it and put a blazer filler in the side of the bed where the aux tank fill would have been. I don't have pics here, but when I get home tomorrow I'll take one and post it. I had a lot of problem finding an adapter to go down to 1.25 inch though. Finally just welded on a piece of pipe to the end of the filler pipe, jb welded it and there you go. A word of advice though, cut the hole on the outside of the bed FIRST! Then cut the one on the inside to line up to it. Its hard to go the otherway. Hindsight is always 20/20 they say. Anyway, I'll post a pic of the finished product tomorrow. Good luck, Jeff.

dinnut · 10-03-2003, 05:15 PM

those 68 chargers had the coolest filler necks.

jay6891 · 10-03-2003, 07:51 PM

I put a fuel door on the inside of my bed. I came from a Mustang. Best use of a F@rd part so far. Ran out of primer soooo, it is rusted up when this pic was taken.

10-02-2003, 01:17 PM	#26
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Closed!

10-03-2003, 09:06 AM	#28
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,051	Opps. __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

10-03-2003, 05:15 PM	#30
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	those 68 chargers had the coolest filler necks. __________________ 70 longbed 496/th400/Ford 9"

10-03-2003, 07:51 PM	#31
jay6891 Car Knocker Join Date: May 2001 Location: jefferson,arkansas Posts: 664	I put a fuel door on the inside of my bed. I came from a Mustang. Best use of a F@rd part so far. Ran out of primer soooo, it is rusted up when this pic was taken. __________________ 68 c-10,91 sportside bed,350 .030 over,4 bolt,10-1 comp,2.05 intake/1.94 exhaust,1.6 Harland Sharp roller rockers,edelbrock rpm cam and intake w/750 carb, 700r4, 3.73 gears,Jacabbs Electronic Igntion w/Accel HEI distributer and super coil. ZR-1 roll pan, filled tailights. Blazer tank. Hidden hitch. 2 1/2" Flowmaster 40's. Parts bought but not installed>> ford 9" posi with disc. CCP front and rear lowering kit 4/5. Cab corners,foor boards,rockers, cab braces, Phatom grill, Painless wiring kit.

10-03-2003, 11:19 AM	#29
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Like you, I went with the garden hose method for a long time then finally got tired of it and put a blazer filler in the side of the bed where the aux tank fill would have been. I don't have pics here, but when I get home tomorrow I'll take one and post it. I had a lot of problem finding an adapter to go down to 1.25 inch though. Finally just welded on a piece of pipe to the end of the filler pipe, jb welded it and there you go. A word of advice though, cut the hole on the outside of the bed FIRST! Then cut the one on the inside to line up to it. Its hard to go the otherway. Hindsight is always 20/20 they say. Anyway, I'll post a pic of the finished product tomorrow. Good luck, Jeff.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.