UT 68 and 72 door panels,Big block specific parts, brackets, shrouds, pulleys, mounts

[WIDESIDE72]

I forget if I already asked you or not, do you have a decent BB engine harness and oil pressure line?
Posted via Mobile Device

[Critterman71]

What all do you have for 71/72 big block stuff.

[RaTcheTmasTer]

Originally Posted by WIDESIDE72

I forget if I already asked you or not, do you have a decent BB engine harness and oil pressure line?
Posted via Mobile Device

No sorry I do not.

Critterman
I have alt brackets both types , pulleys, PS remote BB power steering setups, fans, water pumps, intakes, a 69 BB carb and intake, fan shrouds, 4 core clamps, clips, heat shields pass side, high humps, consoles, nice black steering wheel, 3 straight non-rusty tail gates, perfect blazer hatch door complete, oops . . . got carried away. You only asked about BB stuff.

[Classic Heartbeat]

I would do $100.00 shipped on the 72 BB Engine Brackets... LMN WES

[RaTcheTmasTer]

Originally Posted by Classic Heartbeat

I would do $100.00 shipped on the 72 BB Engine Brackets... LMN WES

Hi Wes. Can you be a little more specific?

Thanks
Tim

[RaTcheTmasTer]

Originally Posted by Classic Heartbeat

I would do $100.00 shipped on the 72 BB Engine Brackets... LMN WES

Oh, I think I figured it out!

You are referring to the engine frame brackets?

Thanks for the offer but I will pass. I am asking $160 plus shipping. We are way apart.

but . . .
I have a set of 68-71 BB frame brackets I will sell for $100 shipped. I believe i have the underside rubber bushings and bolts. I understand they will work on 72 as well.

[RaTcheTmasTer]

Originally Posted by Critterman71

What all do you have for 71/72 big block stuff.

I forgot to say I also have BB frame brackets. both styles.

[Classic Heartbeat]

Thanks for the reply. WES

[Critterman71]

I need big block brackets that mount to the block for the clam shell style (72) big block stands do you have any? I have the stands and lower clams. LMK

[RaTcheTmasTer]

Originally Posted by Critterman71

I need big block brackets that mount to the block for the clam shell style (72) big block stands do you have any? I have the stands and lower clams. LMK

As you probably know, the 72 style has a frame bracket that bolts to the frame and a "clam" that bolts to the engine. Then the two join together with long horizontal bolts through the middle. There are no "lower" clams.

The 68-71 style have a frame bracket, a long bolt with a rubber bushing that goes through the middle of the frame bracket vertically, or perpendicular to the engine, and bolts to a motor mount that is bolted to the engine.

The picture I have above of the 1972 frame brackets are all you need for the frame. Then all you need is the clams that bolt to the engine as mentioned above.

[Critterman71]

I need the engine clams then as I have the rest just I have nothing bolted to the engine to mat to the lower stand.

[RaTcheTmasTer]

Originally Posted by Critterman71

I need the engine clams then as I have the rest just I have nothing bolted to the engine to mat to the lower stand.

Oh ok gotchya. I have a couple of complete sets but no extra clams that I know of. I will look around some more.

Tim

[Critterman71]

LMK if you find some. I hate to buy a complete set just for the upper clams.