Spring Bushings

[1972RedNeck]

I recently pulled a set of springs off a '63 K20. The bushings are shot. What size should they be? The inside of the spring with the bushing removed is about 1.15".

[padresag]

why don't you just order them. various places have them. you also didn't specify which ones that you are after
ron

[1972RedNeck]

I need the bushings for just the springs. The shackles are fine. The bushings were worn though and the spring is egg shaped so it is hard to get a good measurement.

[padresag]

Originally Posted by 1972RedNeck

I need the bushings for just the springs. The shackles are fine. The bushings were worn though and the spring is egg shaped so it is hard to get a good measurement.

again , why do you not just order them. various places do have them.
perhaps you need new main leafs also
ron

[1972RedNeck]

Originally Posted by padresag

again , why do you not just order them. various places do have them.
perhaps you need new main leafs also
ron

I probably do need new leaves. Mine are half thickness at the top of the eye.