MT Edelbrock 800 AVS carb - The 1947 - Present Chevrolet & GMC Truck Message Board Network

snj8198 · 07-19-2012, 04:32 PM

Hi gang,

$325 shipped CONUS

Edelbrock 800 AVS model 1813 (part# 1813), with proper jet kit (part# Edel 1841), also includes both straight and 90* fuel line fitting, and additional size 31 squirter.

I purchased this new from Summit racing for my big block:
http://www.summitracing.com/parts/EDL-1813/

with the proper jet kit:
http://http://www.summitracing.com/parts/EDL-1841/

I have 1000 miles on this carb and decided to go smaller. It is a bit too much carb for my low rpm motor. If you are looking to feed a small block with a high rpm power band, or large cube small block, or modest big block this 800 will work well for you.

Name: carb pic.jpg
Views: 188
Size: 52.5 KB

Name: carb pic.jpg
Views: 188
Size: 52.5 KB

Name: jet kit 1841.jpg
Views: 168
Size: 38.1 KB

Name: jet kit.jpg
Views: 180
Size: 48.3 KB

The box in the picture is from my 650, it is in good shape and I can pack some additional newspaper inside to eliminate any move through shipping.

Any question don't hesitate to ask. Thanks for looking!

-steve

snj8198 · 07-21-2012, 11:57 AM

ttt

snj8198 · 07-22-2012, 11:07 PM

ok ok, new price.

snj8198 · 07-26-2012, 12:45 AM

ttt

07-19-2012, 04:32 PM	#1
snj8198 Registered User Join Date: Feb 2007 Location: Star Valley, WY Posts: 2,038	Edelbrock 800 AVS carb Hi gang, $325 shipped CONUS Edelbrock 800 AVS model 1813 (part# 1813), with proper jet kit (part# Edel 1841), also includes both straight and 90* fuel line fitting, and additional size 31 squirter. I purchased this new from Summit racing for my big block: http://www.summitracing.com/parts/EDL-1813/ with the proper jet kit: http://http://www.summitracing.com/parts/EDL-1841/ I have 1000 miles on this carb and decided to go smaller. It is a bit too much carb for my low rpm motor. If you are looking to feed a small block with a high rpm power band, or large cube small block, or modest big block this 800 will work well for you. The box in the picture is from my 650, it is in good shape and I can pack some additional newspaper inside to eliminate any move through shipping. Any question don't hesitate to ask. Thanks for looking! -steve __________________ Steve 1971 GMC Longbox. Full Roller Stroker 489 w/ FiTech EFI, Chris Straub Cam/NV4500/205/D60/14B w. Grizzly Locker and 4.11's. 2" Lift on 33's Last edited by snj8198; 07-22-2012 at 11:06 PM. Reason: price change

07-21-2012, 11:57 AM	#2
snj8198 Registered User Join Date: Feb 2007 Location: Star Valley, WY Posts: 2,038	Re: Edelbrock 800 AVS carb ttt __________________ Steve 1971 GMC Longbox. Full Roller Stroker 489 w/ FiTech EFI, Chris Straub Cam/NV4500/205/D60/14B w. Grizzly Locker and 4.11's. 2" Lift on 33's

07-22-2012, 11:07 PM	#3
snj8198 Registered User Join Date: Feb 2007 Location: Star Valley, WY Posts: 2,038	Re: Edelbrock 800 AVS carb ok ok, new price. __________________ Steve 1971 GMC Longbox. Full Roller Stroker 489 w/ FiTech EFI, Chris Straub Cam/NV4500/205/D60/14B w. Grizzly Locker and 4.11's. 2" Lift on 33's

07-26-2012, 12:45 AM	#4
snj8198 Registered User Join Date: Feb 2007 Location: Star Valley, WY Posts: 2,038	Re: Edelbrock 800 AVS carb ttt __________________ Steve 1971 GMC Longbox. Full Roller Stroker 489 w/ FiTech EFI, Chris Straub Cam/NV4500/205/D60/14B w. Grizzly Locker and 4.11's. 2" Lift on 33's



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.