AZ EXCELLENT condition Tilt steering column - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1774btcrew** · 07-25-2012, 10:04 PM

SOLD TO bluek5 This is an EXCELLENT condition tilt steering column removed from a motor home with less than 50,000 miles. These are the same exact length as the 67-72 trucks but the neutral safety switch is mounted higher up. All parts are in great condition. Selector lens is nice and clear with no yellowing and includes a new gear selector pointer. Use as is or repaint for show quality. Tilt is nice and tight and works as it should. Automatic lever housing is in great shape with no play where the pin mounts and there are NO dents in the tube or housing. Turn signal cancels as it should as well. I have had several variations of this column for the 67-72s and this is the nicest one. Price is $225 not including shipping.

bluek5 · 07-25-2012, 10:18 PM

How much to ship to 84043. It looks like the selector housing is just a little different shape than the tilt in my blazer also can the tilt lever be replaced with the correct one?
Thanks, Paul

**1774btcrew** · 07-25-2012, 10:41 PM

Early/ Correct Tilt lever can easily be purchased from LMC or others. figure $25 shipping. This will be packaged with levers removed as it is much easier to package.

bluek5 · 07-25-2012, 10:48 PM

A couple more questions any problem getting the seal and retainer over the shift lever on bottom of the column? I will need to remove and use my old parts. Can the neutral safety switch be re-located or will the wiring reach the new location? If these are not an issue with installing it I will take it.

**1774btcrew** · 07-25-2012, 11:37 PM

To be honest with you I don't have the answers you need. I don't have a 72 so I can't check. I do have an original truck tilt that I am redoing but haven't got as far as redoing the seal so I don't really know. Sorry I couldn't help. Sending PM as well

HeavyMetalChevy · 07-26-2012, 12:08 AM

Quote:

Originally Posted by bluek5

A couple more questions any problem getting the seal and retainer over the shift lever on bottom of the column? I will need to remove and use my old parts. Can the neutral safety switch be re-located or will the wiring reach the new location? If these are not an issue with installing it I will take it.

Quote:

Originally Posted by 1774btcrew

To be honest with you I don't have the answers you need. I don't have a 72 so I can't check. I do have an original truck tilt that I am redoing but haven't got as far as redoing the seal so I don't really know. Sorry I couldn't help. Sending PM as well

This is a RV tilt. The NSS (neutral safety switch) can be relocated and wiring will reach. These are nice because they do not require mods to bolt right in as far as the steering shaft goes

DWIZZLE

**1774btcrew** · 07-26-2012, 01:13 AM

Thanks, I have seen a couple that were done and didn't think it was any big deal to move the Neutral safety switch.

07-25-2012, 10:04 PM	#1
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,601	EXCELLENT condition Tilt steering column SOLD TO bluek5 This is an EXCELLENT condition tilt steering column removed from a motor home with less than 50,000 miles. These are the same exact length as the 67-72 trucks but the neutral safety switch is mounted higher up. All parts are in great condition. Selector lens is nice and clear with no yellowing and includes a new gear selector pointer. Use as is or repaint for show quality. Tilt is nice and tight and works as it should. Automatic lever housing is in great shape with no play where the pin mounts and there are NO dents in the tube or housing. Turn signal cancels as it should as well. I have had several variations of this column for the 67-72s and this is the nicest one. Price is $225 not including shipping. Last edited by 1774btcrew; 07-26-2012 at 04:02 PM.

07-25-2012, 10:18 PM	#2
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: EXCELLENT condition Tilt steering column How much to ship to 84043. It looks like the selector housing is just a little different shape than the tilt in my blazer also can the tilt lever be replaced with the correct one? Thanks, Paul

07-25-2012, 10:41 PM	#3
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,601	Re: EXCELLENT condition Tilt steering column Early/ Correct Tilt lever can easily be purchased from LMC or others. figure $25 shipping. This will be packaged with levers removed as it is much easier to package.

07-25-2012, 10:48 PM	#4
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: EXCELLENT condition Tilt steering column A couple more questions any problem getting the seal and retainer over the shift lever on bottom of the column? I will need to remove and use my old parts. Can the neutral safety switch be re-located or will the wiring reach the new location? If these are not an issue with installing it I will take it.

07-25-2012, 11:37 PM	#5
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,601	Re: EXCELLENT condition Tilt steering column To be honest with you I don't have the answers you need. I don't have a 72 so I can't check. I do have an original truck tilt that I am redoing but haven't got as far as redoing the seal so I don't really know. Sorry I couldn't help. Sending PM as well

07-26-2012, 01:13 AM	#7
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,601	Re: EXCELLENT condition Tilt steering column Thanks, I have seen a couple that were done and didn't think it was any big deal to move the Neutral safety switch.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.