KS Horn Caps F/S

[Ironhorse]

Total of 9 caps, 3 blue Chevrolet, 2 blue GMC, 2 metal '63-'66 (I think) and 1 metal '60-'61 cap (I think) Not sure on the metal caps as to the year of use. Some plastic caps may have one tab missing, some are complete. All nine caps $40 shipped lower 48, money oder only, no Paypal.

[Hart_Rod]

Can you post better pics of buttons with the red Chevy emblems including a side view?
Posted via Mobile Device

[Ironhorse]

Couple pics of the sides, both right side up and up side down. Rubbers good on both caps, no splits. One cap has some minor nics and needs a re-paint on the emblem. Other cap is really nice for it's age. Hope these help.

[Hart_Rod]

Originally Posted by Ironhorse

Couple pics of the sides, both right side up and up side down. Rubbers good on both caps, no splits. One cap has some minor nics and needs a re-paint on the emblem. Other cap is really nice for it's age. Hope these help.

Thanks for the pictures. Do you think these will fit on a 67/68 chevy truck steering wheel?

[Ironhorse]

I honestly can't say on the fit to the 67-68 style wheel. My '71 truck has a newer mid-80's wheel and cap and not sure what the diameter is of the 67-68 style steering wheel. Sorry, I know that does'nt help much.

[Hart_Rod]

If you'll measure the rubber ring, I'll measure my wheel.
Posted via Mobile Device

[Ironhorse]

Rob, measured the rubber ring at 2 1/4" in dia., snaps tight onto a 3-hole metal retainer cup. Same type cups as pictured in previous posting "Horn & Column Parts F/S" Not sure if it is the same style cup you might have on a 67-68 wheel. May fit but just not sure. Sorry can't answer better than that.

[Hart_Rod]

Originally Posted by Ironhorse

Rob, measured the rubber ring at 2 1/4" in dia., snaps tight onto a 3-hole metal retainer cup. Same type cups as pictured in previous posting "Horn & Column Parts F/S" Not sure if it is the same style cup you might have on a 67-68 wheel. May fit but just not sure. Sorry can't answer better than that.

How much for the best one shipped to 32571?
Posted via Mobile Device

[Ironhorse]

Was really hoping to sell the lot as one bunch but would do $10 shipped for the best bowtie metal cap. Figure shipping at couple bucks or so. $I'd give the cap an 8 + on a 1-10, good rubber ring with no splits. Sound fair to you?

[Hart_Rod]

Originally Posted by Ironhorse

Was really hoping to sell the lot as one bunch but would do $10 shipped for the best bowtie metal cap. Figure shipping at couple bucks or so. $I'd give the cap an 8 + on a 1-10, good rubber ring with no splits. Sound fair to you?

Sounds good send me your PayPal
Posted via Mobile Device

[Ironhorse]

Rob, sorry but as I mentioned in the start of the posting I don't have a Paypal account. I only use money orders when I buy or sell over the 'net. I have also had board members send $$ in folded in couple sheets of paper for small item purchases. If still interested PM me for a mailing address for payment.