![]() |
![]() |
#1 |
Registered User
Join Date: Jul 2003
Location: dallas
Posts: 27
|
backspacing ???'s
how much backspacing can I go before hitting the frame????
![]() |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,963
|
I had a 15x14 custom steelies w/31x18.5 MT's under my 67short fleet. The only frame mod was removal of the factory bumpstop & bracket on the outside of the frame. It might actually clear; the main reason I removed it was for clearance when it was lowered.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jul 2003
Location: dallas
Posts: 27
|
have any pics??????
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Mar 2003
Location: Bremerton, WA
Posts: 1,839
|
lots of threads
There have been lots of threads on this, try running a search on backspace. Stock is 4-1/2".
__________________
Silence is golden, duct tape is silver. - Scott |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,963
|
The only pics I have are from years ago & My scanner doesn't want to scan them for some reason. It looked like a typical pro-street truck, the main difference was I used offset wheels instead of narrowing the rear-end. I didn't want to narrow the rear because I knew eventually I would step up to big diameter wheels.... which I did.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jul 2003
Location: dallas
Posts: 27
|
SCOTI how much offset did you use???????
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Jun 2001
Location: Austin, Texas
Posts: 796
|
Pretty sure the stock 15 inch steel rims are 3.5 offset. I've run 15 inch 4.5 offset rims with no problems.
__________________
69 SWB C/10 5-6 drop 700R4 69 Firebird Convert 455 4 spd 70 Torino GT Convert Austin-Texas |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,963
|
15x14 w/10" b.spacing.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Jan 2000
Location: Orange Beach, Alabama
Posts: 133
|
SCOTI
If I make the frame mod and put some bigger tubs in the bed of my fleet side I should be able to run a 31x18 tire with out rubbing the frame. I do not have to move the trailing arms are anything else is that right.
__________________
71 cheyenne 402 th400 swb 71 camper special (PARTS TRUCK) 70 Stepside swb 350 |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,963
|
The trailing arms remain stock.... you just can't use lowering blocks w/this set-up. I widened my tubs to the frame rail. I also had to tweak the e-brake cables so they wouldn't contact the wheels but that was pretty easy.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
![]() |
![]() |
![]() |
Bookmarks |
|
|