![]() |
![]() |
#1 |
Registered User
Join Date: May 2012
Location: California
Posts: 68
|
Pointers on EXHAUST
Hey guys,
Currently I have 2 1/4" exhaust with magnaflows and 2 1/2" side pipes after the mufflers.. Im debating weather to change out the 2 1/4" to 2 1/2 running through the magnaflows.. I still want the drive-a-bility but just a tad bit more noise. With the 2 1/4" exhaust on now, it is pretty loud..I think i might have gotten used to the sound, which might have a lot to do with why I want louder.. any opinions? |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: May 2012
Location: California
Posts: 68
|
Re: Pointers on EXHAUST
ohh and my truck is a daily driver.. has a mild 327 with a mild cam, headers etc..
I sit in traffic almost everyday coming home from work for about an hour in 100 degree weather.. so not sure if the 2 1/2 would give me headaches? |
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() Join Date: Feb 2001
Location: New Madison, Ohio
Posts: 21,365
|
Re: Pointers on EXHAUST
I am not sure if there is much difference sound wise between a 2 1/4 and 2 1/2" pipes.
__________________
A husband can be right...or...A husband can be happy. ![]() 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. ![]() 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc ![]() ![]() JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: May 2012
Location: California
Posts: 68
|
Re: Pointers on EXHAUST
hmm not sure either, but I just want to avoid the "headache rumble " in traffic
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jan 2003
Location: Guntown,MS
Posts: 172
|
Re: Pointers on EXHAUST
That tiny bit of difference will make no difference in sound.
if you want louder, get different mufflers. Smaller magnaflows than you have will give you more loud, and not the drone.
__________________
1985 K10 Under Severe Reconstructive Surgery 5.3/New Paint/New Interior/Yadda Yadda Yadda |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: May 2012
Location: California
Posts: 68
|
Re: Pointers on EXHAUST
hmm so the swith from 2 1/4 to 2 1/2 will make little to no difference?
I would say very little difference to the ear. Agreed the mufflers will have more influence for you. I tried various mufflers and I ended up with Spintec. Last edited by 70cst; 08-03-2012 at 02:57 AM. |
![]() |
![]() |
![]() |
#7 |
Senior Member
![]() Join Date: Mar 2003
Location: Colfax-California
Posts: 8,553
|
Re: Pointers on EXHAUST
Probably the only difference you will see with the dual exhaust between the 2-1/4 and 2-1/2 will be a lighter wallet
You want to get rid of the 'headache rumble'? Get rid of the headers, install the corvette ramhorns and go with a single 3'' exhaust with a magnaflow Last edited by kwmech; 08-03-2012 at 04:08 PM. |
![]() |
![]() |
![]() |
#8 |
The Engine Whisperer
Join Date: Sep 2006
Location: Ohio
Posts: 770
|
Re: Pointers on EXHAUST
Smaller will make it louder. And putting a chambered muffler on there will also make it a bit louder.
|
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: May 2012
Location: California
Posts: 68
|
Re: Pointers on EXHAUST
thanks for the tips guys!! I think i might keep the exhaust i have on now,
but later switch the mufflers out |
![]() |
![]() |
![]() |
Bookmarks |
|
|