|
08-04-2012, 03:51 PM
|
#1 |
|
Registered User
Join Date: May 2012
Location: Aurora, Colorado
Posts: 3
|
Wheel Help
Hello everyone, I am proudly working with an 85 c10 LWB and I just finished the Belltech 4/6 static suspension drop and I am in need of people that have knowledge of this setup and what wheels they would use or are using. I am wanting to go with 20's staggered. I bought some tires off a guy, the fronts are 255 45R20 and the rears are 285 50R20.
What do you think the backspacing and offset would need to be for it to fit? I am thinking 8.5 inch width in the front and 10 inch width for the rear. |
|
|
|
08-04-2012, 04:03 PM
|
#2 |
|
Registered User
Join Date: May 2012
Location: Aurora, Colorado
Posts: 3
|
Re: Wheel Help
Here are some pictures
Last edited by Nforcer; 08-04-2012 at 04:04 PM. Reason: add pictures |
|
|
|
|
08-04-2012, 04:56 PM
|
#3 |
|
Square
Join Date: Feb 2011
Location: Phoenix Arizona
Posts: 1,568
|
Re: Wheel Help
check out this link. should help you determine what you need,
CLICK ME!!!
__________________
Squarebody Syndicate |
|
|
|
|
08-04-2012, 06:17 PM
|
#4 |
|
Registered User
Join Date: Aug 2010
Location: AZ
Posts: 3,069
|
Re: Wheel Help
I would suggest a 5.25 BS on a 8.5", and a 5.5 BS on a 10" wheel. It is always best to measure and make sure, since you are running a taller than usual tire. I think those tires will look greg on there, and really fill the fender wells.
Let me know if I can help you out further with selecting wheels. Travis |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
