Correct Fuel line Route ... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ChiefRocka** · 08-04-2012, 09:52 AM

I've seen various pics of how the fuel is route from the fuel pump around to carb on 292.

I know THIS is not correct .....

-
-

-
-
I thinking it should be ran along the front of the valve cover, between the t-stat housing ??

sigshooter · 08-04-2012, 10:02 AM

correct!, I have a 292 fuel line I will try and post pics later today

**ChiefRocka** · 08-04-2012, 10:03 AM

Here's a 292 out of a K20....seems like it could be stock, but seems like it could of went thru the front ??
-
-

sigshooter · 08-04-2012, 10:09 AM

This is very close to my all original stock 292

**ChiefRocka** · 08-04-2012, 10:59 AM

I just viewed his entire thread ... Great work !

sigshooter · 08-04-2012, 11:31 AM

Quote:

Originally Posted by ChiefRocka

I just viewed his entire thread ... Great work !

Super nice guy! I have talked with him on the phone a few times, just a really nice guy. Most people on this forum on good folks.... That is why I like this site so much

**aerotruk63** · 08-04-2012, 06:45 PM

Looked through my literature, 292 is the only engine featured without the fuel line rendered. All other 4 & 6 cyl route under the distributor, up, between the valve cover and thermostat housing , over to the carb.

**Captainfab** · 08-05-2012, 01:19 AM

My '63 292 does have the fuel line ran between the valve cover and the thermostat housing. I don't remember the route from the fuel pump to there. I can get a pic if you like.

**aerotruk63** · 08-05-2012, 05:38 AM

Motor pulled from 63 C60.

**ChiefRocka** · 08-05-2012, 09:27 AM

Quote:

Originally Posted by Captainfab

My '63 292 does have the fuel line ran between the valve cover and the thermostat housing. I don't remember the route from the fuel pump to there. I can get a pic if you like.

That not neccessary. I basically just needed to confirm if it ran between the VC and T-stat.

I can handle hardlines.....

Thanks
Posted via Mobile Device

08-04-2012, 09:52 AM	#1
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,147	Correct Fuel line Route ... I've seen various pics of how the fuel is route from the fuel pump around to carb on 292. I know THIS is not correct ..... - - - - I thinking it should be ran along the front of the valve cover, between the t-stat housing ?? __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

08-04-2012, 10:02 AM	#2
sigshooter Registered User Join Date: Aug 2011 Location: Tahlequah, Ok Posts: 1,235	Re: Correct Fuel line Route ... correct!, I have a 292 fuel line I will try and post pics later today __________________ 1965 long bed ( grandpas old truck ) 1964 long bed BBW Custom Cab 1966 Short stepside 1964 long bed 1965 long bed Custom Cab, factory air, V-8, powerglide

08-04-2012, 10:03 AM	#3
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,147	Re: Correct Fuel line Route ... Here's a 292 out of a K20....seems like it could be stock, but seems like it could of went thru the front ?? - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

08-04-2012, 10:09 AM	#4
sigshooter Registered User Join Date: Aug 2011 Location: Tahlequah, Ok Posts: 1,235	Re: Correct Fuel line Route ... This is very close to my all original stock 292 Attached Images __________________ 1965 long bed ( grandpas old truck ) 1964 long bed BBW Custom Cab 1966 Short stepside 1964 long bed 1965 long bed Custom Cab, factory air, V-8, powerglide

08-04-2012, 10:59 AM	#5
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,147	Re: Correct Fuel line Route ... I just viewed his entire thread ... Great work ! __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

08-04-2012, 06:45 PM	#7
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: Correct Fuel line Route ... Looked through my literature, 292 is the only engine featured without the fuel line rendered. All other 4 & 6 cyl route under the distributor, up, between the valve cover and thermostat housing , over to the carb.

08-05-2012, 01:19 AM	#8
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,248	Re: Correct Fuel line Route ... My '63 292 does have the fuel line ran between the valve cover and the thermostat housing. I don't remember the route from the fuel pump to there. I can get a pic if you like. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

08-05-2012, 05:38 AM	#9
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: Correct Fuel line Route ... Motor pulled from 63 C60.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.