Black wrinkle powder coat - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bram · 10-06-2003, 10:14 AM

It finally feels like I'm making progress! Here is my frame back from the powder coaters. I had it done in black wrinkle. I'm not looking for a shiny finish because I live 3 1/2 miles down a dirt road and that shine just doesn't seem to stay.

This actually makes it look shiny because of the flash but it's not.

I did all the springs too.

Now the fender wells and the radiator support on the other hand got a gloss powder coat, I wanted everything under the hood to shine.

72shadetree · 10-06-2003, 10:35 AM

that looks sweet i know about that long gravel driveway also lol

Bram · 10-06-2003, 11:54 AM

Thanks for the compliment 72shadetree.
Rock chips are a very common thing on all my vehicles. The price I pay for living in the country wouldn't have it any other way!

Iron-Butt · 10-06-2003, 07:49 PM

Yes, I wish I was still in the country.

cheyenne10 · 10-07-2003, 01:16 AM

Ddi you powder coat springs with bushings in them? If so how did you protect them? I have some new ones I would like to clean and paint or have powdercoated but am concerned about damaging bushings.

Bram · 10-07-2003, 08:52 AM

No I pulled them out because I had them sand blasted then powder coated.

landon4421 · 10-07-2003, 05:53 PM

cheyenne10, When I had my springs powdered I had to take them completely apart ! Then they sand blasted and and powdered, Them. They came out great, and according to the guys at the powder coaters they should ride better. Good luck, with your project. Landon

low 84 · 10-07-2003, 07:20 PM

that looks awsome man. if you don't mind, how much?

Bram · 10-07-2003, 09:02 PM

Thanks low 84.
It was just over $500.00 total for the frame, front and rear springs, and a whole lot of misc parts.

Denny · 10-07-2003, 09:54 PM

The powder coating looks great. I wish there was someone around the St. Louis area that powder coats, I have a buddy seat frame that I need powder coated.

jorgensensc · 10-07-2003, 09:59 PM

Any idea (approximately) how much it costs for a blazer tank and straps to get powdercoated?

Bram · 10-08-2003, 05:05 PM

jorgensensc it all depends on the shop, so it's really hard to say.

mocwon · 10-08-2003, 05:26 PM

Looks really nice. That is a great idea, even for highways and paved roads!!!

woodyjeff · 10-08-2003, 09:11 PM

The powdercoating looks great and I think 500 bucks was cheap I looked into having my rally rims done and they wanted $140 just for the four rims. By the way, I love the Eagle Globe and Anchor, oorah Marine Corps

FRENCHBLUE72 · 10-08-2003, 09:15 PM

Look's like a great foundation to start the project off with..

10-06-2003, 10:14 AM	#1
Bram Broke Join Date: Aug 2001 Location: West Plains,MO Posts: 385	Black wrinkle powder coat It finally feels like I'm making progress! Here is my frame back from the powder coaters. I had it done in black wrinkle. I'm not looking for a shiny finish because I live 3 1/2 miles down a dirt road and that shine just doesn't seem to stay. This actually makes it look shiny because of the flash but it's not. I did all the springs too. Now the fender wells and the radiator support on the other hand got a gloss powder coat, I wanted everything under the hood to shine. __________________ 72CheyenneSuper1ton4x4BigBlock

10-06-2003, 10:35 AM	#2
72shadetree KEEP ON TRUCKING Join Date: Sep 2000 Location: martinsville va Posts: 2,563	that looks sweet i know about that long gravel driveway also lol __________________ 72 cheyenne 2wd lwb 71 k20 sons bassett va

10-06-2003, 11:54 AM	#3
Bram Broke Join Date: Aug 2001 Location: West Plains,MO Posts: 385	Thanks for the compliment 72shadetree. Rock chips are a very common thing on all my vehicles. The price I pay for living in the country wouldn't have it any other way! __________________ 72CheyenneSuper1ton4x4BigBlock

10-06-2003, 07:49 PM	#4
Iron-Butt 454 club Join Date: Oct 2002 Location: Oklahoma Posts: 1,348	Yes, I wish I was still in the country. __________________ David 1965 Chevrolet c-10 454 automatic Custom bbw swb. 1965 Chevrolet C-10 swb (Sold) 1963 Chevrolet C-10 6 Cyl automatic with dual exhaust, pb, ps and 17's. R.I.P "I will miss you. 1967 Chevrolet C-10 6 Cyl Custom lwb 1939 Chevrolet Coupe, 350 v8 automatic. 1935 Chevrolet 2 Dr Standard in the works. 2015 Harley Davidson Street Glide. 2023 Chevrolet Stingray Z51 Convertible. I never want to grow up.

10-07-2003, 01:16 AM	#5
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	leaf springs Ddi you powder coat springs with bushings in them? If so how did you protect them? I have some new ones I would like to clean and paint or have powdercoated but am concerned about damaging bushings. __________________ Bob

10-07-2003, 08:52 AM	#6
Bram Broke Join Date: Aug 2001 Location: West Plains,MO Posts: 385	No I pulled them out because I had them sand blasted then powder coated. __________________ 72CheyenneSuper1ton4x4BigBlock

10-07-2003, 05:53 PM	#7
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	cheyenne10, When I had my springs powdered I had to take them completely apart ! Then they sand blasted and and powdered, Them. They came out great, and according to the guys at the powder coaters they should ride better. Good luck, with your project. Landon __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

10-07-2003, 07:20 PM	#8
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	that looks awsome man. if you don't mind, how much? __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

10-07-2003, 09:02 PM	#9
Bram Broke Join Date: Aug 2001 Location: West Plains,MO Posts: 385	Thanks low 84. It was just over $500.00 total for the frame, front and rear springs, and a whole lot of misc parts. __________________ 72CheyenneSuper1ton4x4BigBlock

10-07-2003, 09:54 PM	#10
Denny Registered User Join Date: Jul 2002 Location: Cedar Hill, MO Posts: 426	The powder coating looks great. I wish there was someone around the St. Louis area that powder coats, I have a buddy seat frame that I need powder coated. __________________ 1969 Chevy C10. Dakota Digital Gauges, 383 Votex Engine, MSD 8361 Distributor, MSD 6A Unit, Demon Carb, Phoenix Transmission 4L80E trans, 3:73 Posi Rear End Early Classics 6 Lug Disc Brakes and Spindles All Stainless Lines

10-07-2003, 09:59 PM	#11
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Any idea (approximately) how much it costs for a blazer tank and straps to get powdercoated? __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

10-08-2003, 05:05 PM	#12
Bram Broke Join Date: Aug 2001 Location: West Plains,MO Posts: 385	jorgensensc it all depends on the shop, so it's really hard to say. __________________ 72CheyenneSuper1ton4x4BigBlock

10-08-2003, 05:26 PM	#13
mocwon Keep On Truckin' Join Date: Mar 2003 Location: Buda, Texas Posts: 1,354	Looks really nice. That is a great idea, even for highways and paved roads!!! __________________ Just Passin' Thru Some projects are like herding cats; others are like putting out fires; this one was like herding cats on fire.....

10-08-2003, 09:11 PM	#14
woodyjeff Registered User Join Date: Mar 2003 Location: Lincoln, NE Posts: 32	The powdercoating looks great and I think 500 bucks was cheap I looked into having my rally rims done and they wanted $140 just for the four rims. By the way, I love the Eagle Globe and Anchor, oorah Marine Corps __________________ 70 Custom-10 LWB

10-08-2003, 09:15 PM	#15
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Look's like a great foundation to start the project off with.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.