Front rollpan with fog/driving lights? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BossHogg69 · 08-31-2012, 01:03 AM

I have a '69 swb stepside that I will be putting a front roll pan on. I recently have been toying with the idea of maybe grafting some driving lights into it by using a '69 Camaro front valance and grafting the part of the panel that holds the driving lights onto the C10 rollpan. I'm just wondering what you guys thought about doing such a thing. Here are some shots of the '69 Camaro valance panel.

BossHogg69 · 09-05-2012, 10:14 PM

anyone?

AdMiMc · 09-05-2012, 11:23 PM

I like the "frenched" look. I am doing this with mine except I am just going to use a piece of pipe the same size as the fog lights welded into the roll pan. This method would probably be easier to get the contour of the roll pan to match. I don't know if the camaro front valance has the same shape or contour as our roll pans. The link below has a red truck about half way down with lights frenched in the bumper. It should look similar in a roll pan just minus the front marker lights.
.
http://67-72chevytrucks.com/vboard/s...d.php?t=322473

08-31-2012, 01:03 AM	#1
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Front rollpan with fog/driving lights? I have a '69 swb stepside that I will be putting a front roll pan on. I recently have been toying with the idea of maybe grafting some driving lights into it by using a '69 Camaro front valance and grafting the part of the panel that holds the driving lights onto the C10 rollpan. I'm just wondering what you guys thought about doing such a thing. Here are some shots of the '69 Camaro valance panel. Attached Images __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

09-05-2012, 10:14 PM	#2
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Front rollpan with fog/driving lights? anyone? __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

09-05-2012, 11:23 PM	#3
AdMiMc Registered User Join Date: Aug 2012 Location: Gadsden, AL Posts: 14	Re: Front rollpan with fog/driving lights? I like the "frenched" look. I am doing this with mine except I am just going to use a piece of pipe the same size as the fog lights welded into the roll pan. This method would probably be easier to get the contour of the roll pan to match. I don't know if the camaro front valance has the same shape or contour as our roll pans. The link below has a red truck about half way down with lights frenched in the bumper. It should look similar in a roll pan just minus the front marker lights. . http://67-72chevytrucks.com/vboard/s...d.php?t=322473 __________________ -Adam '72 Chevy c10 lwb (project truck) '72 Chevy c10 w/'70 front clip (parts truck) (aka ugly truck) 2005 Chrysler 300 (DD) Okay, who put a "stop payment" on my reality check?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.