![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Jul 2012
Location: AZ
Posts: 125
|
Transmission cross member bolt hole measurements please.
I welded in a new 1/8 steel piece to fix this:
And I am looking for the measurements to drill in the new bolt holes. I initially assumed they would be centered in the mount but didn't want an extra set of holes. Does anyone have the mount accessible to where they could measure the holes from the top side? The seam from the upper brackets to the holes would be great. Thanks in advance. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jul 2012
Location: AZ
Posts: 125
|
Re: Transmission cross member bolt hole measurements please.
Bad quality, taken with cell phone, but you get the point. Still need to grind a little on it.
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jul 2012
Location: AZ
Posts: 125
|
Re: Transmission cross member bolt hole measurements please.
bump, sorry looking for some info this weekend to get this done and up and running.
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jul 2012
Location: AZ
Posts: 125
|
Re: Transmission cross member bolt hole measurements please.
Does anyone know if the transmission is centered in the truck?
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Apr 2010
Location: McFarland CA
Posts: 1,392
|
Re: Transmission cross member bolt hole measurements please.
looks like 15 3/4 to the first hole and 17 1/4 to second
__________________
Pancho 69 c/10 step side 454/400 with 3.07 |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jul 2012
Location: AZ
Posts: 125
|
Re: Transmission cross member bolt hole measurements please.
Great thanks. Is that to the center of the bolt holes? Does that look like the two holes are bascially centered??
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Apr 2010
Location: McFarland CA
Posts: 1,392
|
Re: Transmission cross member bolt hole measurements please.
Measures are to the center of each hole.
__________________
Pancho 69 c/10 step side 454/400 with 3.07 |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jul 2012
Location: AZ
Posts: 125
|
Re: Transmission cross member bolt hole measurements please.
thanks again
|
![]() |
![]() |
![]() |
Bookmarks |
|
|