I6 230 truck & Nova II same? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Larry64 · 09-08-2012, 07:53 PM

I have a chance to pick up an I6 230 out of a 1965 Nova II. Are the truck & car engines the same?
Thanks Larry

**Chevy Fleetside** · 09-08-2012, 08:11 PM

Quote:

Originally Posted by Larry64

I have a chance to pick up an I6 230 out of a 1965 Nova II. Are the truck & car engines the same?
Thanks Larry

They might be the same size but I am guessing the nova engine will be down on some HP and torque.

geezer#99 · 09-08-2012, 09:15 PM

Check the oil pan. Sump could be on the wrong end for a swap. Might need to swap it.

Larry64 · 09-08-2012, 09:37 PM

Geezer you are right. It is backwards from the truck.
Thanks Larry

**Captainfab** · 09-08-2012, 11:15 PM

Also check for the presence of the boss for the clutch bellcrank ball stud

Wrenchbender Ret · 09-09-2012, 05:06 PM

If you use the pan & pickup off the other engine there wont be a hole for the dipstick tube. Make sure the Nova engine is a 230. Most of those were 194 s.

Larry64 · 09-10-2012, 10:39 AM

Quote:

Originally Posted by Wrenchbender Ret

If you use the pan & pickup off the other engine there wont be a hole for the dipstick tube. Make sure the Nova engine is a 230. Most of those were 194 s.

Good call Wrenchbender, it is a 194. Contacted seller & informed him it would not have enough HP. Once again thanks for the well informed replies.
Larry

11echo · 09-10-2012, 05:11 PM

The sump on the engines are in different locations between the two configurations. The sump is in the middle on the Chevy II, and at the end (near trans) on a truck. The bolt patterns are the same on both oil pan models. It could be a 194 engine in the Chevy II, but that's a good thing, 194 have steel cranks, 230 is cast iron. "IF" the Chevy II engine comes with a bell housing, it won't work with the truck clutch linkage. The throw-out bearing arm is positioned at 9 o'clock (like most Chevys in the truck) BUT on Chevy II's it's at 7 o'clock. (It would be a good trading piece IF your into that type of thing)

09-08-2012, 07:53 PM	#1
Larry64 Registered User Join Date: Sep 2011 Location: Lewisburg, TN Posts: 315	I6 230 truck & Nova II same? I have a chance to pick up an I6 230 out of a 1965 Nova II. Are the truck & car engines the same? Thanks Larry

09-08-2012, 09:15 PM	#3
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,540	Re: I6 230 truck & Nova II same? Check the oil pan. Sump could be on the wrong end for a swap. Might need to swap it.

09-08-2012, 09:37 PM	#4
Larry64 Registered User Join Date: Sep 2011 Location: Lewisburg, TN Posts: 315	Re: I6 230 truck & Nova II same? Geezer you are right. It is backwards from the truck. Thanks Larry

09-08-2012, 11:15 PM	#5
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: I6 230 truck & Nova II same? Also check for the presence of the boss for the clutch bellcrank ball stud __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

09-09-2012, 05:06 PM	#6
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,203	Re: I6 230 truck & Nova II same? If you use the pan & pickup off the other engine there wont be a hole for the dipstick tube. Make sure the Nova engine is a 230. Most of those were 194 s.

09-10-2012, 05:11 PM	#8
11echo Registered User Join Date: Mar 2010 Location: Bakersfield, CA Posts: 49	Re: I6 230 truck & Nova II same? The sump on the engines are in different locations between the two configurations. The sump is in the middle on the Chevy II, and at the end (near trans) on a truck. The bolt patterns are the same on both oil pan models. It could be a 194 engine in the Chevy II, but that's a good thing, 194 have steel cranks, 230 is cast iron. "IF" the Chevy II engine comes with a bell housing, it won't work with the truck clutch linkage. The throw-out bearing arm is positioned at 9 o'clock (like most Chevys in the truck) BUT on Chevy II's it's at 7 o'clock. (It would be a good trading piece IF your into that type of thing)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.