|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
09-15-2012, 01:27 PM
|
#12 |
|
the boat guy
Join Date: Jul 2007
Location: springfield mo
Posts: 2,339
|
Re: Sending unit help, factory gauges
Mech oil pressuer gage - drill and tap the small plate above the oil filter, use factory line.
Engine temp gage - put aftermarket style metric sending unit in pass side head where there's a plug now. Tach - whoever does your tune have them modify the tach signal for the factory tach. Mech speedo - plenty of options, most cost about $200. Or you can modify eletronic speedo to look like factory gage by using factory face and needle. Posted via Mobile Device
__________________
67, swb, fleet, tach, throttle, 5.3, 4l60e, 3.73's, fuel cell, 5 lug, p.d.b., 4-6 drop. great little truck 66, stevens drag/ski 18' silouette, 350, 2.02 doublehump heads. comp extreme marine 278 cam, vette 7 fin valve covers, old polished edelbrock intake, velvetdrive, casale v-drive, adj cavitation plate. 28, model a rpu project, |
|
|
| Bookmarks |
|
|
Threaded Mode