What length of column do i need to buy? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**CHIZZLER** · 09-17-2012, 11:14 PM

hey buddy.i went with a 32" ididit and wish i would of got a 30" or maybe a 28".it all depends on header clearance on the joints and where you want the wheel.you might want to mock up the motor and tranny with headers on then get the column.i used s-10 conversion headers and they worked great.good luck.are you going to run a small block?

sickred72 · 09-17-2012, 11:34 PM

crate zzz ( triple threat ) sbc with aftermarket edelbrock fuel injection

sickred72 · 09-17-2012, 11:38 PM

i should have just about everything i need for this project except rear end. I need to pull out the old one fit the wheels under the rear fenders and lower the body over them then measure. what should i use camaro, nova, chevelle? rear wheels are super deep? pic is of my wheel on a buddies truck 57

sickred72 · 09-17-2012, 11:45 PM

i can get a polished stainless tilt ( flaming river ) here locally for $580 in stock but its 33". everything i look up says 30" floor shift.

09-17-2012, 11:14 PM	#1
CHIZZLER SAVING ONE TRUCK AT A TIME Join Date: Feb 2010 Location: sherwood oregon Posts: 1,141	Re: What length of column do i need to buy? hey buddy.i went with a 32" ididit and wish i would of got a 30" or maybe a 28".it all depends on header clearance on the joints and where you want the wheel.you might want to mock up the motor and tranny with headers on then get the column.i used s-10 conversion headers and they worked great.good luck.are you going to run a small block? __________________ 53-suburban (99% done) 40-pick up (99.9% done) 12-cc lb dually D-max (dd) 61-crew cab D-max "PAY LESS FOR WHAT YOU NEED PAY MORE FOR WHAT YOU WANT" 53 BURBAN BARN FIND:http://67-72chevytrucks.com/vboard/s...d.php?t=404091 1940 PROJECT MOON SHINE:http://67-72chevytrucks.com/vboard/s...d.php?t=551088 1961 CREW MAX: http://67-72chevytrucks.com/vboard/s....php?p=6957999

09-17-2012, 11:34 PM	#2
sickred72 Registered User Join Date: Oct 2005 Location: oregon Posts: 204	Re: What length of column do i need to buy? crate zzz ( triple threat ) sbc with aftermarket edelbrock fuel injection Attached Images

09-17-2012, 11:38 PM	#3
sickred72 Registered User Join Date: Oct 2005 Location: oregon Posts: 204	Re: What length of column do i need to buy? i should have just about everything i need for this project except rear end. I need to pull out the old one fit the wheels under the rear fenders and lower the body over them then measure. what should i use camaro, nova, chevelle? rear wheels are super deep? pic is of my wheel on a buddies truck 57 Attached Images

09-17-2012, 11:45 PM	#4
sickred72 Registered User Join Date: Oct 2005 Location: oregon Posts: 204	Re: What length of column do i need to buy? i can get a polished stainless tilt ( flaming river ) here locally for $580 in stock but its 33". everything i look up says 30" floor shift.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.