Any ideas???

[specialtyretail]

These were in the bed of one of our 70 C10 trucks we brought in a few weeks ago. Any idea what they are??? Thanks, Fred.

[Stocker]

They might be latching rods for a hard tonneau cover. The brackets attach to the handle / latch assembly at the center rear of the tonneau.

[Crash_OK]

Originally Posted by specialtyretail

These were in the bed of one of our 70 C10 trucks we brought in a few weeks ago. Any idea what they are??? Thanks, Fred.

I could be wrong, but I think the flat plate part goes in between the engine block and the motor mount on a GM pickup produced after 72.. the other end of the rod attached the transmission dust pan.. Not sure.. but I think I have seen this before...

[Livrat]

Those are the strut rods and plates that go onto the 73 up 4X4, the plate bolts under the engine mount cups and the rods attach to a cast aluminum flywheel cover on a T350

[specialtyretail]

Originally Posted by Livrat

Those are the strut rods and plates that go onto the 73 up 4X4, the plate bolts under the engine mount cups and the rods attach to a cast aluminum flywheel cover on a T350

Thanks, that is kind of what we were thinking .
Posted via Mobile Device