Missing Part - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RxPx33 · 10-01-2012, 11:16 PM

What goes right here? Or is this something one of the PO installed then took out?

**WIDESIDE72** · 10-02-2012, 01:33 AM

Nothing there oem. PO probably had a switch for fog lights, etc
Posted via Mobile Device

bobs409 · 10-02-2012, 06:44 AM

Seems to be a favorite place for people to drill holes. One of my trucks has a hole there that I will be welding shut and I think my other truck had one too that I did repair years ago. I've seen many in junkyards with this too.

**Classic Bowties** · 10-02-2012, 08:46 AM

Quote:

Originally Posted by RxPx33

What goes right here? Or is this something one of the PO installed then took out?

Quote:

Originally Posted by WIDESIDE72

Nothing there oem. PO probably had a switch for fog lights, etc
Posted via Mobile Device

As WIDESIDES72 said above, that hole pattern definitely looks like something was added and then removed by a p/o, but I wouldn't go as far as saying "Nothing there oem" as some trucks had the below pictured switch. Mel

71K20chevy · 10-02-2012, 08:49 AM

Mine had a washer fluid pump switch the PO mounted there.

Andy4639 · 10-02-2012, 03:04 PM

It looks like a old horn button u buy at a auto store maybe. Black with chrome trim.

**derotoreut** · 10-02-2012, 03:05 PM

Check these out... I could never figure out what they were for! I ended up cutting out my entire dash and replacing it with an unmolested AC dash.

Andy4639 · 10-02-2012, 03:14 PM

Quote:

Originally Posted by derotoreut

Check these out... I could never figure out what they were for! I ended up cutting out my entire dash and replacing it with an unmolested AC dash.

Maybe better ventilation! That's crazy right there.

**Classic Bowties** · 10-02-2012, 06:01 PM

Quote:

Originally Posted by derotoreut

Check these out... I could never figure out what they were for! I ended up cutting out my entire dash and replacing it with an unmolested AC dash.

Was this truck a 69, and were there any other extra holes found anywhere else specifically in the frame rail areas? You may kick yourself, but this may be the remaining missing one of three factory produced Vince Piggins Copo 9561/ZL1 all-aluminum 427 BBC motor factory lightened race trucks. Mel

71K20chevy · 10-02-2012, 07:30 PM

Quote:

Originally Posted by Classic Bowties

Was this truck a 69, and were there any other extra holes found anywhere else specifically in the frame rail areas? You may kick yourself, but this may be the remaining missing one of three factory produced Vince Piggins Copo 9561/ZL1 all-aluminum 427 BBC motor factory lightened race trucks. Mel

Now THAT'S interesting. Would love to know more on the subject

gdavis · 10-02-2012, 08:25 PM

Quote:

Originally Posted by RxPx33

What goes right here? Or is this something one of the PO installed then took out?

might be a choke cable. Mine was there and I remove it.

**derotoreut** · 10-02-2012, 10:17 PM

Quote:

Originally Posted by Classic Bowties

Was this truck a 69, and were there any other extra holes found anywhere else specifically in the frame rail areas? You may kick yourself, but this may be the remaining missing one of three factory produced Vince Piggins Copo 9561/ZL1 all-aluminum 427 BBC motor factory lightened race trucks. Mel

Wow! Now you have my attention. Yes this truck is a 69 C20. Where specifically would there be extra holes in the frame rail? The VIN on this truck indicated it was a cab/chassis model.

I am intrigued. Tell me more about this Vince Piggins Copo. I never heard of this.

midniteblues · 10-02-2012, 11:51 PM

Quote:

Originally Posted by Classic Bowties

Was this truck a 69, and were there any other extra holes found anywhere else specifically in the frame rail areas? You may kick yourself, but this may be the remaining missing one of three factory produced Vince Piggins Copo 9561/ZL1 all-aluminum 427 BBC motor factory lightened race trucks. Mel

**derotoreut** · 10-03-2012, 08:11 AM

Quote:

Originally Posted by Classic Bowties

Was this truck a 69, and were there any other extra holes found anywhere else specifically in the frame rail areas? You may kick yourself, but this may be the remaining missing one of three factory produced Vince Piggins Copo 9561/ZL1 all-aluminum 427 BBC motor factory lightened race trucks. Mel

Very clever. That was good. I must admit you had me thinking there for a minute.

If nothing else, I learned a little about Vince Piggins and his Central Office Production Orders (COPO).

71K20chevy · 10-03-2012, 08:37 AM

Argh

10-01-2012, 11:16 PM	#1
RxPx33 Registered User Join Date: Aug 2012 Location: Derry, PA Posts: 63	Missing Part What goes right here? Or is this something one of the PO installed then took out? Attached Images

10-02-2012, 01:33 AM	#2
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Missing Part Nothing there oem. PO probably had a switch for fog lights, etc Posted via Mobile Device

10-02-2012, 06:44 AM	#3
bobs409 1969 Custom 30 wrecker Join Date: Sep 2001 Location: Pottsville, Pa Posts: 2,611	Re: Missing Part Seems to be a favorite place for people to drill holes. One of my trucks has a hole there that I will be welding shut and I think my other truck had one too that I did repair years ago. I've seen many in junkyards with this too. __________________ Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10

10-02-2012, 08:49 AM	#5
71K20chevy Registered User Join Date: Jul 2012 Location: Ft Wayne Indiana Posts: 1,204	Re: Missing Part Mine had a washer fluid pump switch the PO mounted there. __________________ 71 K20 64 GMC mud truck

10-02-2012, 03:04 PM	#6
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Missing Part It looks like a old horn button u buy at a auto store maybe. Black with chrome trim. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

10-02-2012, 03:05 PM	#7
derotoreut Roto Reuter thats the name... Join Date: Feb 2010 Location: Darien, NY Posts: 1,853	Re: Missing Part Check these out... I could never figure out what they were for! I ended up cutting out my entire dash and replacing it with an unmolested AC dash. Attached Images __________________ ~ Dan My 70 K10 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=782232 My 71 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=651394 1970 SWB Fleet K10 4X4, 5.3L LM7, 4L60E, Dakota Digital RTX, Vintage Air, Ididit tilt 1971 SWB Fleet C10 - Original SWB Arizona truck, new custom restoration project "Kick out your motor and drive while you're still alive - kick it out!" - Heart 1977

10-03-2012, 08:37 AM	#15
71K20chevy Registered User Join Date: Jul 2012 Location: Ft Wayne Indiana Posts: 1,204	Re: Missing Part Argh __________________ 71 K20 64 GMC mud truck



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.