86 C10 305 cam recomendations? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*1FaastC10* · 10-11-2003, 07:53 PM

upon pulling the stock 305 out of my 86 C10, and disassembling it. i found i need a new cam and lifters. does anyone know of a good cam for my combination?

dead stock 305, ESC and AIR systems removed, carb will either be replaced with an Edelbrock 1904 or a rebuild QJet of some kind. stock 700R4, and it will get the 3.08 12 bolt out of my 82. i plan on using this truck as a daily driver, so milage is a concern, and i want it to run on 87 octane.

if you need any more information, let me know.

Tom · 10-11-2003, 10:18 PM

Id say somthing right around 208/214@.050.

*1FaastC10* · 10-12-2003, 09:35 PM

how about a Summit cam? SUM-K1102? http://store.summitracing.com/partde...rt=SUM%2DK1102

CT-Truckster · 10-12-2003, 09:47 PM

yeah i was just gonna suggest a summit cam, you get cam and lifter set for good price. i bought one to put in my 383 but aint got it put together yet. I know quite a few people who run them at the dirt track and have no complaints about them.

4t9er · 10-15-2003, 06:03 PM

Hey 1FastC10, Don't know the specs but I put a Crane fireball 2 cam in a 305 with a Unilite, performer rpm, Q-jet, headers, poly locks, 4-speed saginaw. Very impressive was the torque and power. Still nowhere near the top end of a 350.
4t9er

*1FaastC10* · 10-15-2003, 06:15 PM

i decided to go SUPER cheap. my cam turned out to be ok, despite looking toasted. im going to install a new set of lifters on teh stock cam and call it good. that is, until i can build a 350 to put in it for some real fun.

10-11-2003, 07:53 PM	#1
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,400	86 C10 305 cam recomendations? upon pulling the stock 305 out of my 86 C10, and disassembling it. i found i need a new cam and lifters. does anyone know of a good cam for my combination? dead stock 305, ESC and AIR systems removed, carb will either be replaced with an Edelbrock 1904 or a rebuild QJet of some kind. stock 700R4, and it will get the 3.08 12 bolt out of my 82. i plan on using this truck as a daily driver, so milage is a concern, and i want it to run on 87 octane. if you need any more information, let me know.

10-11-2003, 10:18 PM	#2
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,714	Id say somthing right around 208/214@.050. __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.

10-15-2003, 06:03 PM	#5
4t9er Registered User Join Date: Oct 2003 Location: Elkhart IN Posts: 1	Cam Hey 1FastC10, Don't know the specs but I put a Crane fireball 2 cam in a 305 with a Unilite, performer rpm, Q-jet, headers, poly locks, 4-speed saginaw. Very impressive was the torque and power. Still nowhere near the top end of a 350. 4t9er

10-12-2003, 09:35 PM	#3
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,400	how about a Summit cam? SUM-K1102? http://store.summitracing.com/partde...rt=SUM%2DK1102

10-12-2003, 09:47 PM	#4
CT-Truckster ? Join Date: Jul 2002 Location: Dyersburg, TN Posts: 471	yeah i was just gonna suggest a summit cam, you get cam and lifter set for good price. i bought one to put in my 383 but aint got it put together yet. I know quite a few people who run them at the dirt track and have no complaints about them.

10-15-2003, 06:15 PM	#6
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,400	i decided to go SUPER cheap. my cam turned out to be ok, despite looking toasted. im going to install a new set of lifters on teh stock cam and call it good. that is, until i can build a 350 to put in it for some real fun.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.