WTB lowering parts, etc. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Alvin · 10-13-2003, 03:20 PM

I'm in the process of locating parts to start the rebuild of my coil spring frame. Looking to do a 4/6 drop, with a c-notch, shock relocation, blazer tank, etc. I'm also in need of new cab mounts, bed mounts, radiator support, etc. If you happen to have anything I might be interested in, please let me know! Looking to find as many used peices as possible before buying new. Thanks a lot.

Dropped Spindles
2" front lowering springs
4" rear lowering springs
rear lowering blocks
shock relocation kit
c-notch kit
GOOD power steering box
blazer tank/fuel cell
cab/bed/rad. mount kits

I know it's a wish list, but I thought I'd give it a try! call me crazy

*72longbed* · 10-13-2003, 08:38 PM

Alvin,
I have a brand new pair of ECE 4" drop rear coils that I tried for about 2 weeks in my C-20. They are too low for me but if you are interested I will save you some money on a quality set of springs.

$100.00 shipping included. Let me know.

72longbed

PrimeredThunder · 10-13-2003, 10:41 PM

I have a set of 2" lowering blocks I believe, you can have them for $20...I'll have to double check their size though. I also have the lower ECE Shock relocater brackets too for $25. Let me know, I need to get rid of this stuff.

Kenny

blazer1971 · 10-13-2003, 11:11 PM

Hey 72longbed; Keep me in mind for springs if not wanted by Alvin.
Thanks
Ron

pat · 10-15-2003, 12:26 PM

PrimeredThunder, are your lowering blocks cut at an angle?
just curious

PrimeredThunder · 10-15-2003, 08:55 PM

No they aren't but everything worked great before I pulled them when I mounted the air-ride on my truck.

Kenny

10-13-2003, 03:20 PM	#1
Alvin Never Done? Join Date: May 2000 Location: Ohio Posts: 1,435	WTB lowering parts, etc. I'm in the process of locating parts to start the rebuild of my coil spring frame. Looking to do a 4/6 drop, with a c-notch, shock relocation, blazer tank, etc. I'm also in need of new cab mounts, bed mounts, radiator support, etc. If you happen to have anything I might be interested in, please let me know! Looking to find as many used peices as possible before buying new. Thanks a lot. Dropped Spindles 2" front lowering springs 4" rear lowering springs rear lowering blocks shock relocation kit c-notch kit GOOD power steering box blazer tank/fuel cell cab/bed/rad. mount kits I know it's a wish list, but I thought I'd give it a try! call me crazy __________________ Ethel - The Legend Continues... Ethel has been sold.

10-13-2003, 08:38 PM	#2
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	4' Drop Rear ECE Coils Alvin, I have a brand new pair of ECE 4" drop rear coils that I tried for about 2 weeks in my C-20. They are too low for me but if you are interested I will save you some money on a quality set of springs. $100.00 shipping included. Let me know. 72longbed

10-13-2003, 10:41 PM	#3
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	I have a set of 2" lowering blocks I believe, you can have them for $20...I'll have to double check their size though. I also have the lower ECE Shock relocater brackets too for $25. Let me know, I need to get rid of this stuff. Kenny __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

10-15-2003, 12:26 PM	#5
pat Senior Member Join Date: Jul 2002 Location: Lindsay, TX Posts: 1,245	PrimeredThunder, are your lowering blocks cut at an angle? just curious __________________ 68 Chevy 383/350 w/shift kit, 380hp/425ft-lbs, 4.5/5 drop, 17" TT2s 64 Cadillac Sedan DeVille

10-15-2003, 08:55 PM	#6
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	No they aren't but everything worked great before I pulled them when I mounted the air-ride on my truck. Kenny __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

10-13-2003, 11:11 PM	#4
blazer1971 Registered User Join Date: Apr 2001 Location: apollo bch,fl. usa Posts: 134	Hey 72longbed; Keep me in mind for springs if not wanted by Alvin. Thanks Ron



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.