KS Parting a 72 custom camper now - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**cericd** · 10-05-2012, 09:01 PM

Hey Randy, would you happen to have a nice set of exterior door handles other than the ones in this thread? If not, keep me in line in case the first member decides not to get these. Thanks.

hexafamily · 10-05-2012, 10:41 PM

Quote:

Originally Posted by hexafamily

Randy, I'll take the engine fan if its 7 blade and in good condition. Ship to zip 64086. Let me know where to send the money and how much.

Randy, fan looks good, If 18", I'll take it. Let me know how much and where to send it.

RPIcka · 10-06-2012, 12:09 AM

Hows the vent window assemblies look? If all they need is new rubber I'd be interested for the right price.

teeitup · 10-06-2012, 09:27 AM

72 Super, Ray, engine lifts $10. The valve covers look OK, they just need cleaned up and painted, $15 for them plus shipping for all

cericd, these are the only good ones I have, sorry

hexafamily, I will measure it in a bit

RPicka, I still need to cut silicon and see if the hinge is broke, I will in a bit. The chrome has some pitting on them

Thanks Randy

teeitup · 10-06-2012, 12:27 PM

RPicka, sorry the hinges are broke on wings

Hexafamily, its a 18 incher, I will pm you SUN

Trevor, I got it cut off for you

cericd, here is pic

teeitup · 10-06-2012, 12:30 PM

Other parts taken off

teeitup · 10-06-2012, 12:31 PM

Mirrors pics

teeitup · 10-06-2012, 12:33 PM

driver quality, a couple small dings a little surface rust that most will clean up. Glass has some scratches

kevmic28 · 10-06-2012, 01:25 PM

Hey I pmed you back last night. Send me your mailing address and Ill have a money order in the mail.

**gmc 2500 4x4** · 10-06-2012, 04:32 PM

Quote:

Originally Posted by teeitup

Sorry guys fell asleep while putting kids to bed, Pics now

Eighty-Eight shorty, wiring harness has been spliced down by starter. I do have anotehr set of Alt brackets $27 shpped for them. $10 more for the harness if I ship it with the Alts

Jocko, its a 2 barrell

gmc 2500 4x4, I will give him till Sat morning to decide on booster setup since I'm just posting pics now then I will let you know

RatRod68, I can measure them at lunch, they are stock mirrors

Thanks Randy

randy scratch my spot on the booster, i needed one for drum brakes and found one. thanx<<<<

**dec010974** · 10-06-2012, 06:09 PM

hello. i'm new to this forum. i want the v8 frame mounts that places the engine in the first (2) frame holes. 33176 is my zip code. I need the asap. r

**zicc1835** · 10-06-2012, 10:17 PM

Quote:

Originally Posted by zicc1835

Randy
can you price me out on the antenna if its complete include wire the spring that returns the E brake pedal and the clamp that holds the PS hoses to the frame outside door handle on drivers side looks good take them both if pass side is as good door and hood rubber bumpers if u can getim out without to much trouble maybe you can teach me how not to tearim up on the way out

to 07981
thanks Jess

thanks Randy i see the door handles look much better than mine i will take them also the hood rubbers i see will take those .....still lookin for the rubber door bumbers and hold down clamp for PS lines to frame no rush
Thanks
Jess

**cericd** · 10-06-2012, 10:40 PM

I see that Jess decided to get the door handles. What's the total on the lighter shipped to 77377? Thanks, Chris

teeitup · 10-07-2012, 09:54 AM

kevmic28, info sent

gmc 2500 4x4, no problem

dec010974, $29 shipped for them, I only take money orders

zicc1835, Jess, $26 shipped for handles, hood rubbers, PS hose bracket, and I will try to round up some door bumpers

cericd, Chris, for the lighter, housing and wiring $18 shipped

Thanks Randy

Vintage Windmills · 10-07-2012, 10:45 AM

Randy, any topper clamps?

**zicc1835** · 10-07-2012, 11:38 AM

Quote:

Originally Posted by teeitup

kevmic28, info sent

gmc 2500 4x4, no problem

dec010974, $29 shipped for them, I only take money orders

zicc1835, Jess, $26 shipped for handles, hood rubbers, PS hose bracket, and I will try to round up some door bumpers

cericd, Chris, for the lighter, housing and wiring $18 shipped

Thanks Randy

Randy sounds good I will need the addy again and will mail out PMO on Tuesday
Thank Jess
Posted via Mobile Device
Posted via Mobile Device

**dec010974** · 10-07-2012, 01:46 PM

hello teeitup. i need your address. $29.00 shipping included, rite? i can send usps money order priority mail.

teeitup · 10-07-2012, 04:57 PM

Jud, I don't think I have any out there but will look

Jess, I will let you know when your money arrives, Thanks

dec010974, motor stands are yours, Thanks

Randy

RatRod68 · 10-08-2012, 06:38 AM

Quote:

Originally Posted by teeitup

driver quality, a couple small dings a little surface rust that most will clean up. Glass has some scratches

I'll measure mine tonight and let you know in the morning on these. Thanks for all the pics and info Randy!

**cericd** · 10-08-2012, 03:41 PM

Hey Randy, I'm going to pass on the lighter and hold out for one in better shape. Thanks.

**jocko** · 10-08-2012, 03:51 PM

Hey Randy, this truck is like a Mecum Auction! Nice truck.
Wanted to check on the aux batt wiring. Was a little back in line on it on page 1, but wasn't sure anyone ever actually took it. If still available, I'm very interested. If still back in line a bit, no worries, just wanted to check. Also - I think you posted a pic of it, but wasn't sure which one it was - if you did can you tell me which post # it was.

Thanks!
Jocko

teeitup · 10-08-2012, 09:31 PM

RatRod68, sounds good

cericd, no problem

Jocko, it has been sold to Brian, pics of it on post 50 pics 3, 4 and 5 and post 51 1st pic

Thanks Randy

**thelonerife** · 10-08-2012, 09:45 PM

Randy i need two camper script emblems with the push in inserts. Do you have a set of sport mirrors and backing plates?

teeitup · 10-08-2012, 09:47 PM

Chuck, I have these emblems sold to Ozark Tim, sorry. Also sorry no sport mirrors right now. Thanks Randy

**thelonerife** · 10-08-2012, 10:07 PM

K. thanks.

10-05-2012, 09:01 PM	#76
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,169	Re: Parting a 72 custom camper now Hey Randy, would you happen to have a nice set of exterior door handles other than the ones in this thread? If not, keep me in line in case the first member decides not to get these. Thanks.

10-06-2012, 12:09 AM	#78
RPIcka Registered User Join Date: Aug 2011 Location: Powell River, BC Posts: 229	Re: Parting a 72 custom camper now Hows the vent window assemblies look? If all they need is new rubber I'd be interested for the right price.

10-06-2012, 09:27 AM	#79
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 72 custom camper now 72 Super, Ray, engine lifts $10. The valve covers look OK, they just need cleaned up and painted, $15 for them plus shipping for all cericd, these are the only good ones I have, sorry hexafamily, I will measure it in a bit RPicka, I still need to cut silicon and see if the hinge is broke, I will in a bit. The chrome has some pitting on them Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-06-2012, 12:27 PM	#80
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 72 custom camper now RPicka, sorry the hinges are broke on wings Hexafamily, its a 18 incher, I will pm you SUN Trevor, I got it cut off for you cericd, here is pic Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-06-2012, 12:30 PM	#81
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 72 custom camper now Other parts taken off Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-06-2012, 12:31 PM	#82
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 72 custom camper now Mirrors pics Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-06-2012, 12:33 PM	#83
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 72 custom camper now driver quality, a couple small dings a little surface rust that most will clean up. Glass has some scratches Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-06-2012, 01:25 PM	#84
kevmic28 Registered User Join Date: Jun 2009 Location: Arlington Texas Posts: 602	Re: Parting a 72 custom camper now Hey I pmed you back last night. Send me your mailing address and Ill have a money order in the mail. __________________ 1970 GMC truck 1988 Harley 1200 Sportster

10-06-2012, 06:09 PM	#86
dec010974 Senior Member Join Date: Oct 2012 Location: Miami, Florida Posts: 969	Re: Parting a 72 custom camper now hello. i'm new to this forum. i want the v8 frame mounts that places the engine in the first (2) frame holes. 33176 is my zip code. I need the asap. r

10-06-2012, 10:40 PM	#88
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,169	Re: Parting a 72 custom camper now I see that Jess decided to get the door handles. What's the total on the lighter shipped to 77377? Thanks, Chris

10-07-2012, 09:54 AM	#89
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 72 custom camper now kevmic28, info sent gmc 2500 4x4, no problem dec010974, $29 shipped for them, I only take money orders zicc1835, Jess, $26 shipped for handles, hood rubbers, PS hose bracket, and I will try to round up some door bumpers cericd, Chris, for the lighter, housing and wiring $18 shipped Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-07-2012, 10:45 AM	#90
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting a 72 custom camper now Randy, any topper clamps? __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

10-07-2012, 01:46 PM	#92
dec010974 Senior Member Join Date: Oct 2012 Location: Miami, Florida Posts: 969	Re: Parting a 72 custom camper now hello teeitup. i need your address. $29.00 shipping included, rite? i can send usps money order priority mail.

10-07-2012, 04:57 PM	#93
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 72 custom camper now Jud, I don't think I have any out there but will look Jess, I will let you know when your money arrives, Thanks dec010974, motor stands are yours, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-08-2012, 03:41 PM	#95
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,169	Re: Parting a 72 custom camper now Hey Randy, I'm going to pass on the lighter and hold out for one in better shape. Thanks.



Register or Log In To remove these advertisements.

10-08-2012, 03:51 PM	#96
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,994	Re: Parting a 72 custom camper now Hey Randy, this truck is like a Mecum Auction! Nice truck. Wanted to check on the aux batt wiring. Was a little back in line on it on page 1, but wasn't sure anyone ever actually took it. If still available, I'm very interested. If still back in line a bit, no worries, just wanted to check. Also - I think you posted a pic of it, but wasn't sure which one it was - if you did can you tell me which post # it was. Thanks! Jocko

10-08-2012, 09:31 PM	#97
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 72 custom camper now RatRod68, sounds good cericd, no problem Jocko, it has been sold to Brian, pics of it on post 50 pics 3, 4 and 5 and post 51 1st pic Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-08-2012, 09:45 PM	#98
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Parting a 72 custom camper now Randy i need two camper script emblems with the push in inserts. Do you have a set of sport mirrors and backing plates? __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

10-08-2012, 09:47 PM	#99
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 72 custom camper now Chuck, I have these emblems sold to Ozark Tim, sorry. Also sorry no sport mirrors right now. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-08-2012, 10:07 PM	#100
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Parting a 72 custom camper now K. thanks. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

Register or Log In To remove these advertisements.