VIN # decoding - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Lefty&Son · 10-15-2003, 01:40 PM

Hi All,

I'm as new as you can get, but I've got big plans for my new 67(?) GMC Stepside Longbed.

I've found VIN decoders here and at GMCPauls, but they don't exactly match up to what I have. Mine shows the following (inside driver side door):
CS1590CPC15158A

Can anyone explain this to me, or point me in the right direction?

Thanks, and I look forward to learning and sharing with you all,

Lefty

ckhd · 10-15-2003, 05:24 PM

GMC's are strange. I can decode a Chevy VIN from memory, but I've never found the documentation on GMCs to figure out how the VIN works for them. I know that there are people on this board that can decode GMC VINs though...

Rod · 10-15-2003, 08:51 PM

Yah there are some GMC variations.. anyway.

C = conventional
S = six cyl
1 = 1/2 ton
59 is the cab to axle code which in this case the 59 means 54 inches.
0C is the step side fender box.
P = Pontiac assembly plant
C = 1967 and in this GMC vin variation a B = 68 and A = 69
15158A is the sequential number of the vin.

And welcome to the 67-72 boards.
Rod

jescates · 10-15-2003, 09:00 PM

Welcome from the high desert of California.

Longhorn Man · 10-16-2003, 12:04 AM

Welcome from Central Ohio...GMC trucks rock...esp the one of a kind grills on the 67.

10-15-2003, 01:40 PM	#1
Lefty&Son Registered User Join Date: Oct 2003 Location: Devens, MA Posts: 21	VIN # decoding Hi All, I'm as new as you can get, but I've got big plans for my new 67(?) GMC Stepside Longbed. I've found VIN decoders here and at GMCPauls, but they don't exactly match up to what I have. Mine shows the following (inside driver side door): CS1590CPC15158A Can anyone explain this to me, or point me in the right direction? Thanks, and I look forward to learning and sharing with you all, Lefty __________________ - Working on and swearing at a 1967 GMC Stepside Longbed

10-15-2003, 05:24 PM	#2
ckhd Registered User Join Date: Oct 2000 Location: St. Johns, Arizona Posts: 2,660	GMC's are strange. I can decode a Chevy VIN from memory, but I've never found the documentation on GMCs to figure out how the VIN works for them. I know that there are people on this board that can decode GMC VINs though... __________________ my 2¢ - t.i.o.l.i. Bowen 1968 K20 fleet 1969 K10 swb fleet 1972 K10 Suburban 1972 C10 lwb step 1992 K1500 'burb 1995 K2500 'burb 1997 C1500 'burb 1999 K1500 2000 K1500 'burb Why do I own so many Suburbans?

10-15-2003, 08:51 PM	#3
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Yah there are some GMC variations.. anyway. C = conventional S = six cyl 1 = 1/2 ton 59 is the cab to axle code which in this case the 59 means 54 inches. 0C is the step side fender box. P = Pontiac assembly plant C = 1967 and in this GMC vin variation a B = 68 and A = 69 15158A is the sequential number of the vin. And welcome to the 67-72 boards. Rod __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

10-15-2003, 09:00 PM	#4
jescates Registered User Join Date: Aug 2001 Location: Mcloud, Oklahoma Posts: 656	Welcome from the high desert of California. __________________ 1970 C-10 LWB 1998 Jeep Wrangled TJ 2009 Honda VTX 1300 2013 Buick Enclave

10-16-2003, 12:04 AM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Welcome from Central Ohio...GMC trucks rock...esp the one of a kind grills on the 67.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.