Another premium LWB bed---for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**PICKMUP** · 10-07-2003, 12:29 AM

I just got this one yesterday. Really straight and nice. No rust, dents or bondo that I can detect. $400 for the bed only...$600 w/TG also straight and nice. (Not selling TG w/o bed)

**PICKMUP** · 10-07-2003, 12:32 AM

Original wood is very solid...not rotted away...metal strips clean & straight...not rusted.
This truck has/had the rare Dana 60, 1/2T, coil spring, 3:54, posi rearend that is for sale.

**PICKMUP** · 10-07-2003, 12:34 AM

TG is straight inside & out...no rust...bedsides are straight.

Terry Peerson · 10-07-2003, 06:59 AM

You couldn't get it to Kansas City could you? I would buy it for sure!

T

**PICKMUP** · 10-07-2003, 12:10 PM

Just find some Kansas trucker on a run over here that will bring it back.

Terry Peerson · 10-07-2003, 03:49 PM

Is it in the same condition underneath as it is on top? Do you have any pic's? I will check around to see if I can find any trucks that haul between me and you. Any idea what a fair price for hauling might be?

Jason71k10 · 10-07-2003, 09:04 PM

why, why, WHY does everyone with good parts live so far away from me!

haha

nice looking bed......i'd buy it for sure if I wasn't so damn far away!

Jason

Terry Peerson · 10-08-2003, 11:27 AM

Just wanted to let you know that I am trying to figure-out how to find a trucker to haul this bed to KC for me. If I can find a way to get it, and the underneath looks as good as what I can see of the top-side, you can consider it sold (Bed Only, don't need the tailgate). Also, if anyone has any experience with using truckers and/or knows someone who will haul this for me, please let me know!

Thanks,

T

Yellow Cheyenne · 10-08-2003, 02:09 PM

Got one shipped from him to Kansas for $400 a couple years ago. Trucker was already there and had room and was ready to come back, ottherwise it would have been much higher. If $400 for shipping is a price you can live with, let me know and I will find the info.

Randy

**PICKMUP** · 10-08-2003, 03:05 PM

Also look into these small car haulers. They have smaller trucks with cheaper trailers that haul about three cars. They are continuously criss-crossing the US delivering cars.
...and yes it is as nice on the under side.

Hooter · 10-08-2003, 04:59 PM

makes you wonder what happened to the rest of the truck

Terry Peerson · 10-09-2003, 10:29 AM

Pickmup,

Tell you what, if you could get me an address to send a check, I will go ahead and pay you for the bed ($ 400.00). If you could then sit on it for a little while, I will find a way to get it hauled here. Hopefully, that won't take too long.

Yellow Cheyenne,

Thanks for suggesting the person who hauled your bed. I would be interested in speaking with this person about arranging shipment to the K.C. area.

I would also invite advice as to how to unload the thing easily without damaging it. Anybody?

Thanks,

TP

**PICKMUP** · 10-09-2003, 11:13 AM

Sure, I can hold it a while. Sent you an email.

landon4421 · 10-09-2003, 02:37 PM

Frank if Terry Peerson, dose not want the tailgate, how much would you sell it to me for? Is it perfect? Just wondering, it will be a while before i need it but if it is in great shape you could probally hold it for me till I get back up there, or if some one heads down this way? let me know please. Landon

EDIT: I am looking for a perfect one for Kevins show truck ! thanks again frank !

**PICKMUP** · 10-09-2003, 03:07 PM

Castiron (Rene) is 1st.
You are 2nd for the TG.
It is not perfect, but real close. One small 6" dent inside bottom of gate.

landon4421 · 10-09-2003, 03:09 PM

Thanks Frank ! I will pass on this one, I am looking for mint. If at all possable. If you find a mint one keep me in mind. Thanks again my friend ! :p

Castiron9 · 10-09-2003, 03:14 PM

Frank sent you a P.M..........Thanks..............

**PICKMUP** · 10-15-2003, 09:45 PM

Terry here it comes. Hung, slung & loaded! Headed for KS.

**PICKMUP** · 10-15-2003, 09:48 PM

Castiron: notice your TG is off and ready. Pretty slick sling for beds, huh. This is the third generation...I had to bend a couple before I got to this point.

Bryan: That is your Dana 60 posi under there...getting closer. It is now out and has to be drained, strapped to pallet and delivered to freight lines...soon.

Terry Peerson · 10-15-2003, 10:23 PM

Thanks for the pictures Frank! I have never handled a bed before. How much does it weigh? How many guys do I need to carry it? I was going to try to get 5 or 6 guys to help. I hope that's enough. I can't wait to get it!!

padreisla · 10-15-2003, 10:28 PM

Hey Pickmup, is the bumper and receiver hitch for sale?

Thanks...Joey

Castiron9 · 10-15-2003, 11:15 PM

Thanks Frank.I will send some $$$$$$$$$$$$,,,,$ooN.....You are the man Frank............

Hotrodhenryj · 10-15-2003, 11:42 PM

It really amazes me how you find such nice parts in a state where the weather is so hard on sheetmetal. Fair prices for nice stuff, you are the man. Did you sell the blue bed with the nice new floor?

**PICKMUP** · 10-16-2003, 12:04 AM

Terry: 5-6 guys can move the bed nicely. It is too much for four.

Joey: I am not shipping an old bumper or hitch. It is not worth the effort or the cost of shipping. These things are everywhere, cheap. You can find one there and save $$$.

Rene: I thing you are really going to like this TG.

HotRod: Still got that blue/oak/stainless bed. Everybody loves it but no sale yet. Some of this stuff sits around here for months...and I just got another really nice straight one yesterday. Haven't been able to post pics & details yet.

I have to get some of this stuff that is sold, packed & shipped before I offer any more!!!

stelth2002 · 10-16-2003, 02:12 AM

Hes got a nice place there. I went there to get some parts and its a small gold mine for parts if you have a truck. Also a great guy to deal with.

10-07-2003, 12:29 AM	#1
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,134	Another premium LWB bed---for sale I just got this one yesterday. Really straight and nice. No rust, dents or bondo that I can detect. $400 for the bed only...$600 w/TG also straight and nice. (Not selling TG w/o bed) Attached Images __________________ Email: frankeham@comcast.net Phone: 360-956-7170

10-07-2003, 12:32 AM	#2
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,134	TG Original wood is very solid...not rotted away...metal strips clean & straight...not rusted. This truck has/had the rare Dana 60, 1/2T, coil spring, 3:54, posi rearend that is for sale. Attached Images __________________ Email: frankeham@comcast.net Phone: 360-956-7170

10-07-2003, 12:34 AM	#3
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,134	Nice TG TG is straight inside & out...no rust...bedsides are straight. Attached Images __________________ Email: frankeham@comcast.net Phone: 360-956-7170

10-07-2003, 12:10 PM	#5
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,134	Terry Just find some Kansas trucker on a run over here that will bring it back. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

10-07-2003, 09:04 PM	#7
Jason71k10 ready for reassembly Join Date: Jun 2002 Location: Barrie ONT, Canada Posts: 413	why, why, WHY does everyone with good parts live so far away from me! haha nice looking bed......i'd buy it for sure if I wasn't so damn far away! Jason __________________ stock 71 4x4 2003 Jeep Liberty, rocky mountain edition I'm obsessed, and wouldn't have it any other way!

10-07-2003, 06:59 AM	#4
Terry Peerson Registered User Join Date: Aug 2003 Location: Bonner Springs, KS Posts: 311	You couldn't get it to Kansas City could you? I would buy it for sure! T

10-07-2003, 03:49 PM	#6
Terry Peerson Registered User Join Date: Aug 2003 Location: Bonner Springs, KS Posts: 311	Is it in the same condition underneath as it is on top? Do you have any pic's? I will check around to see if I can find any trucks that haul between me and you. Any idea what a fair price for hauling might be?

10-08-2003, 11:27 AM	#8
Terry Peerson Registered User Join Date: Aug 2003 Location: Bonner Springs, KS Posts: 311	Just wanted to let you know that I am trying to figure-out how to find a trucker to haul this bed to KC for me. If I can find a way to get it, and the underneath looks as good as what I can see of the top-side, you can consider it sold (Bed Only, don't need the tailgate). Also, if anyone has any experience with using truckers and/or knows someone who will haul this for me, please let me know! Thanks, T

10-08-2003, 02:09 PM	#9
Yellow Cheyenne Registered User Join Date: Jun 2001 Location: Eastern Kansas Posts: 488	Got one shipped from him to Kansas for $400 a couple years ago. Trucker was already there and had room and was ready to come back, ottherwise it would have been much higher. If $400 for shipping is a price you can live with, let me know and I will find the info. Randy __________________ '72 Cheyenne. AC, PS, PB, Rear slider window, tilt. Light yellow (grapefruit yellow according to new sales literature from '72) '56 Chevy short step V-8 (My dad bought it new!!) '70 Olds 442 convertible '70 Olds Rallye 350

10-08-2003, 03:05 PM	#10
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,134	Car Haulers Also look into these small car haulers. They have smaller trucks with cheaper trailers that haul about three cars. They are continuously criss-crossing the US delivering cars. ...and yes it is as nice on the under side. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

10-08-2003, 04:59 PM	#11
Hooter My other Love Join Date: Aug 2001 Location: Castlegar B.C. Canada Posts: 4,085	makes you wonder what happened to the rest of the truck __________________ Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com First generation Monte Carlo club pictures of my life

10-09-2003, 10:29 AM	#12
Terry Peerson Registered User Join Date: Aug 2003 Location: Bonner Springs, KS Posts: 311	Pickmup, Tell you what, if you could get me an address to send a check, I will go ahead and pay you for the bed ($ 400.00). If you could then sit on it for a little while, I will find a way to get it hauled here. Hopefully, that won't take too long. Yellow Cheyenne, Thanks for suggesting the person who hauled your bed. I would be interested in speaking with this person about arranging shipment to the K.C. area. I would also invite advice as to how to unload the thing easily without damaging it. Anybody? Thanks, TP

10-09-2003, 11:13 AM	#13
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,134	Terry Sure, I can hold it a while. Sent you an email. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

10-09-2003, 02:37 PM	#14
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	Frank if Terry Peerson, dose not want the tailgate, how much would you sell it to me for? Is it perfect? Just wondering, it will be a while before i need it but if it is in great shape you could probally hold it for me till I get back up there, or if some one heads down this way? let me know please. Landon EDIT: I am looking for a perfect one for Kevins show truck ! thanks again frank ! __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter" Last edited by landon4421; 10-09-2003 at 02:42 PM.

10-09-2003, 03:07 PM	#15
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,134	Landin Castiron (Rene) is 1st. You are 2nd for the TG. It is not perfect, but real close. One small 6" dent inside bottom of gate. __________________ Email: frankeham@comcast.net Phone: 360-956-7170



Register or Log In To remove these advertisements.

10-09-2003, 03:09 PM	#16
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	Thanks Frank ! I will pass on this one, I am looking for mint. If at all possable. If you find a mint one keep me in mind. Thanks again my friend ! :p __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

10-09-2003, 03:14 PM	#17
Castiron9 72 LONGHORN OWNER Join Date: Sep 2002 Location: Seattle Wash. Posts: 963	Tailgate Frank sent you a P.M..........Thanks.............. __________________ 72-SUPER CHEYENNE/20 LONGHORN 70-C/30 DUALLY

10-15-2003, 09:45 PM	#18
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,134	Here it comes Terry here it comes. Hung, slung & loaded! Headed for KS. Attached Images __________________ Email: frankeham@comcast.net Phone: 360-956-7170

10-15-2003, 09:48 PM	#19
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,134	Castiron: notice your TG is off and ready. Pretty slick sling for beds, huh. This is the third generation...I had to bend a couple before I got to this point. Bryan: That is your Dana 60 posi under there...getting closer. It is now out and has to be drained, strapped to pallet and delivered to freight lines...soon. Attached Images __________________ Email: frankeham@comcast.net Phone: 360-956-7170 Last edited by PICKMUP; 10-15-2003 at 09:51 PM.

10-15-2003, 10:23 PM	#20
Terry Peerson Registered User Join Date: Aug 2003 Location: Bonner Springs, KS Posts: 311	Thanks for the pictures Frank! I have never handled a bed before. How much does it weigh? How many guys do I need to carry it? I was going to try to get 5 or 6 guys to help. I hope that's enough. I can't wait to get it!!

10-15-2003, 10:28 PM	#21
padreisla Registered User Join Date: Jan 2003 Location: Tampa, Florida Posts: 141	Bumper Hey Pickmup, is the bumper and receiver hitch for sale? Thanks...Joey __________________ 67 C20 LWB 454 BB THD 400 97 Jeep Wrangler 4cyl 5sp

10-15-2003, 11:15 PM	#22
Castiron9 72 LONGHORN OWNER Join Date: Sep 2002 Location: Seattle Wash. Posts: 963	Thanks Frank.I will send some $$$$$$$$$$$$,,,,$ooN.....You are the man Frank............ __________________ 72-SUPER CHEYENNE/20 LONGHORN 70-C/30 DUALLY

10-15-2003, 11:42 PM	#23
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	It really amazes me how you find such nice parts in a state where the weather is so hard on sheetmetal. Fair prices for nice stuff, you are the man. Did you sell the blue bed with the nice new floor? __________________ Arizona rust free sheetmetal

10-16-2003, 12:04 AM	#24
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,134	Terry: 5-6 guys can move the bed nicely. It is too much for four. Joey: I am not shipping an old bumper or hitch. It is not worth the effort or the cost of shipping. These things are everywhere, cheap. You can find one there and save $$$. Rene: I thing you are really going to like this TG. HotRod: Still got that blue/oak/stainless bed. Everybody loves it but no sale yet. Some of this stuff sits around here for months...and I just got another really nice straight one yesterday. Haven't been able to post pics & details yet. I have to get some of this stuff that is sold, packed & shipped before I offer any more!!! __________________ Email: frankeham@comcast.net Phone: 360-956-7170

10-16-2003, 02:12 AM	#25
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	Hes got a nice place there. I went there to get some parts and its a small gold mine for parts if you have a truck. Also a great guy to deal with. __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

Register or Log In To remove these advertisements.