My new truck -just scored it yesterday - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70blackfish · 10-07-2012, 03:04 PM

All loaded up...with body parts to make it a chevy...

Posted via Mobile Device

**Already Gone** · 10-07-2012, 03:07 PM

Cool,looks like its been lowered too.

70blackfish · 10-07-2012, 03:07 PM

The back is on the frame, with springs removed. Any way to use a spring and keep the rear this low.
Posted via Mobile Device

PanelDeland · 10-07-2012, 03:13 PM

Welcome!!! Looks like a great start to a project.You can go pretty low with a C-notch and lowering springs.You'll need an adjustable panhard at over 4 in.Opinions on that may vary.

AirSpeed · 10-07-2012, 03:32 PM

Quote:

Originally Posted by PanelDeland

Welcome!!! Looks like a great start to a project.You can go pretty low with a C-notch and lowering springs.You'll need an adjustable panhard at over 4 in.Opinions on that may vary.

I lowered my 69 with springs and my stock panhard bar is at its limit! Once in a while if I hit a big dip in the road I can feel the rear tire hit the inner fender well as the bar pulls the axle to the side. It's not horrible but I definately wouldnt go any lower without an adjustable bar.
Posted via Mobile Device

**70cst** · 10-07-2012, 03:39 PM

Hey 70blackfish ...

to the forums and

from Ohio.

on your

Square_78 · 10-07-2012, 06:28 PM

Welcome to the forum!

bolt some D-2600 air bags (with shrader valves like air shocks) in where the springs should be and c-notch the frame. Then you can adjust the height and also throw 1000lbs in the bed if you need to and not worry about it dragging on the ground. Cheap and easy! Dont change that beautiful front end to a Chevy! Too many Chevys out there and not enough nice GMC's.

**CC69Rat** · 10-07-2012, 06:46 PM

Why make it a Chevy? I like it like it is (?)

1972RedNeck · 10-07-2012, 06:48 PM

Quote:

Originally Posted by CC69Rat

Why make it a Chevy? I like it like it is (?)

I always thought '67 - '72 Chevy's were ugly. Then I saw a '72 GMC.

BrianPlaster · 10-07-2012, 07:01 PM

I love the dual headlights of a GMC / I love a my chevy but a 72 GMC long bed would be so cool .

Sometimes you gotta LoVe the one your with....

big_al_71 · 10-07-2012, 07:10 PM

looks like a nice start!!!

70blackfish · 10-07-2012, 07:53 PM

The guy I got the truck from through in all the stuff to make it a chevy, I will sell them. I guess
Posted via Mobile Device

**CC69Rat** · 10-07-2012, 07:56 PM

Didnt mean to change your mind. I have both, at first I didnt like the GMC front end either but it grows on you.

Either way would be cool.

Posted via Mobile Device

Beetle · 10-07-2012, 08:17 PM

Don't make it a Chevy!! Whatever you do, if you don't want the GMC tin give it to me!

Save the GMC's!

**CC69Rat** · 10-07-2012, 08:25 PM

Do you know what year your Chevy stuff is?

Your front fenders will only work with 67-68 Chevy stuff. Your hood, hoodlatch, front splash pan and core support will need to change if you go with the conversion.

69-72 Chevy, youll need core support and both front fenders.

Also, your front bumper being GMC is different than either year Chevy. Id just leave it. I think it looks awesome. I wouldnt even wash it.

Posted via Mobile Device

black_sheep454 · 10-07-2012, 08:48 PM

Love those wheels and hub caps
Posted via Mobile Device

70blackfish · 10-07-2012, 11:10 PM

Quote:

Originally Posted by CC69Rat

Do you know what year your Chevy stuff is?

Your front fenders will only work with 67-68 Chevy stuff. Your hood, hoodlatch, front splash pan and core support will need to change if you go with the conversion.

69-72 Chevy, youll need core support and both front fenders.

Also, your front bumper being GMC is different than either year Chevy. Id just leave it. I think it looks awesome. I wouldnt even wash it.

Posted via Mobile Device

The chevy stuff is 1968- grill, rad support, hood, doors with glass
Posted via Mobile Device

**CC69Rat** · 10-08-2012, 10:44 AM

Sounds like you're good to do Chevy stuff if you go that route. You could always sell the GMC stuff too (?)

Your call man .. But give it time before you change it over. The GMC front end will grow on you.

ole dollor · 10-08-2012, 12:53 PM

looks like a good project, welcome to the board from Texas, have fun with your new truck....

RustyBucket · 10-08-2012, 01:08 PM

Quote:

Originally Posted by 70blackfish

All loaded up...with body parts to make it a chevy...

Posted via Mobile Device

I dunno, hard to improve on a face like that, ... but then you said it's a '68 front.. LOVE THEM SLANT-NOSES TOO!!

10-07-2012, 03:04 PM	#1
70blackfish Registered User Join Date: Oct 2012 Location: Newhall CA Posts: 1,195	My new truck -just scored it yesterday All loaded up...with body parts to make it a chevy... Posted via Mobile Device Attached Images

10-07-2012, 03:07 PM	#2
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,144	Re: My new truck -just scored it yesterday Cool,looks like its been lowered too. __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

10-07-2012, 03:07 PM	#3
70blackfish Registered User Join Date: Oct 2012 Location: Newhall CA Posts: 1,195	Re: My new truck -just scored it yesterday The back is on the frame, with springs removed. Any way to use a spring and keep the rear this low. Posted via Mobile Device

10-07-2012, 03:13 PM	#4
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: My new truck -just scored it yesterday Welcome!!! Looks like a great start to a project.You can go pretty low with a C-notch and lowering springs.You'll need an adjustable panhard at over 4 in.Opinions on that may vary. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

10-07-2012, 03:39 PM	#6
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: My new truck -just scored it yesterday Hey 70blackfish ... to the forums and from Ohio. on your __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

10-07-2012, 06:28 PM	#7
Square_78 Registered User Join Date: Mar 2012 Location: Okanagan Valley, BC, Canada Posts: 1,237	Re: My new truck -just scored it yesterday Welcome to the forum! bolt some D-2600 air bags (with shrader valves like air shocks) in where the springs should be and c-notch the frame. Then you can adjust the height and also throw 1000lbs in the bed if you need to and not worry about it dragging on the ground. Cheap and easy! Dont change that beautiful front end to a Chevy! Too many Chevys out there and not enough nice GMC's. __________________ #teamlongbed "I refuse to go disc brakes. I actually love drum brakes. It makes for an adventure." - 50bomb 1978 Chevy shop truck - static 6/8" 1970 GMC 1500 - Accuair eLevel Resto-mod http://67-72chevytrucks.com/vboard/s...d.php?t=537497

10-07-2012, 06:46 PM	#8
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,214	Re: My new truck -just scored it yesterday Why make it a Chevy? I like it like it is (?) __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

10-07-2012, 07:01 PM	#10
BrianPlaster Registered User Join Date: Feb 2012 Location: Carrboro NC Posts: 71	Re: My new truck -just scored it yesterday I love the dual headlights of a GMC / I love a my chevy but a 72 GMC long bed would be so cool . Sometimes you gotta LoVe the one your with....

10-07-2012, 07:10 PM	#11
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: My new truck -just scored it yesterday looks like a nice start!!! __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

10-07-2012, 07:53 PM	#12
70blackfish Registered User Join Date: Oct 2012 Location: Newhall CA Posts: 1,195	Re: My new truck -just scored it yesterday The guy I got the truck from through in all the stuff to make it a chevy, I will sell them. I guess Posted via Mobile Device

10-07-2012, 07:56 PM	#13
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,214	Re: My new truck -just scored it yesterday Didnt mean to change your mind. I have both, at first I didnt like the GMC front end either but it grows on you. Either way would be cool. Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

10-07-2012, 08:17 PM	#14
Beetle Registered User Join Date: May 2009 Location: Fayetteville, NC Posts: 725	Re: My new truck -just scored it yesterday Don't make it a Chevy!! Whatever you do, if you don't want the GMC tin give it to me! Save the GMC's! __________________ Jason TEAM C10 HOT ROD POWER TOUR 689 Short Step 68 Step Trucks Sold: 70 GMC, 72 K5 Members met: Andy4639 GCncsuHD CSGAS zicc1835 hotrod farm truck Mingrao Bhelton brenthiggins

10-07-2012, 08:25 PM	#15
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,214	Re: My new truck -just scored it yesterday Do you know what year your Chevy stuff is? Your front fenders will only work with 67-68 Chevy stuff. Your hood, hoodlatch, front splash pan and core support will need to change if you go with the conversion. 69-72 Chevy, youll need core support and both front fenders. Also, your front bumper being GMC is different than either year Chevy. Id just leave it. I think it looks awesome. I wouldnt even wash it. Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

10-07-2012, 08:48 PM	#16
black_sheep454 Registered User Join Date: May 2011 Location: Lebanon, Mo. Posts: 1,315	Re: My new truck -just scored it yesterday Love those wheels and hub caps Posted via Mobile Device __________________ 1968 chevy lwb, getting ready to join forces with the 70 gmc 1970 gmc swb, getting ready to be a 68 chevy swb 1971 gmc lwb 2500 2wd Sierra Grande 1988 chevy 1-ton crew cab 2wd waiting for a 12v cummins

10-08-2012, 10:44 AM	#18
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,214	Re: My new truck -just scored it yesterday Sounds like you're good to do Chevy stuff if you go that route. You could always sell the GMC stuff too (?) Your call man .. But give it time before you change it over. The GMC front end will grow on you. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)



Register or Log In To remove these advertisements.

10-08-2012, 12:53 PM	#19
ole dollor Registered User Join Date: May 2012 Location: Anton, Texas Posts: 2,364	Re: My new truck -just scored it yesterday looks like a good project, welcome to the board from Texas, have fun with your new truck....

Register or Log In To remove these advertisements.