Is this normal for the Lower Control Arms - The 1947 - Present Chevrolet & GMC Truck Message Board Network

OldYeller72 · 10-09-2012, 07:27 PM

Please see the picture, the arrow is pointing to the issue.
Just curious if this is normal for these trucks

GMCJOE · 10-09-2012, 07:33 PM

Nope, sure isn't. Looks like you need to get your hands on another one.

GMC Canuck · 10-09-2012, 08:31 PM

that bit that's broken off is the outside threads for the big nut. While it may be 'common' for these trucks, it's a common failure.

10-09-2012, 07:27 PM	#1
OldYeller72 Registered User Join Date: May 2012 Location: Whitewright, TX Posts: 27	Is this normal for the Lower Control Arms Please see the picture, the arrow is pointing to the issue. Just curious if this is normal for these trucks Attached Images

10-09-2012, 07:33 PM	#2
GMCJOE Registered User Join Date: Aug 2012 Location: Junction City, KS Posts: 782	Re: Is this normal for the Lower Control Arms Nope, sure isn't. Looks like you need to get your hands on another one. __________________ Joseph Joe's 69 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=543253 1969 GMC SWB-350 SBC 700R4 2013 Ram 2500 CC Laramie Longhorn Edition-6.7 PPEI EFI Live CSP5 5” ProFlo Exhaust

10-09-2012, 08:31 PM	#3
GMC Canuck Registered User Join Date: May 2012 Location: Ingersoll, Ontario Posts: 93	Re: Is this normal for the Lower Control Arms that bit that's broken off is the outside threads for the big nut. While it may be 'common' for these trucks, it's a common failure.



Register or Log In To remove these advertisements.